A crack started along the facade: how to fix a defect and forget about the problem

  • Apr 02, 2021
click fraud protection
A crack started along the facade: how to fix a defect and forget about the problem
A crack started along the facade: how to fix a defect and forget about the problem

The appearance of a crack on the facade of a house is not such a rare occurrence in our time. Therefore, it would not be superfluous for each owner to know how to eliminate a common defect. You will have to work hard to achieve the desired effect, but if you make everything your own hands, it will be possible to save a lot of money that would otherwise go into the pocket of a hired master.

First you need to check if the foundation has settled. / Photo: youtube.com.
First you need to check if the foundation has settled. / Photo: youtube.com.

What you need: ladder, trowel, spray gun, sealant gun, grinder, diamond disc, deep penetration primer, gypsum, outdoor tile adhesive

The process of repairing a crack that has gone along the facade of a building, in general, is not something fundamentally complicated. Even a person who has never done anything like this before is capable of eliminating such a defect with the proper tools and materials. The most important thing is not to rush during work and follow the advice and recommendations of more experienced craftsmen to the letter.

instagram viewer
We wash out the crack. / Photo: youtube.com.

The first and foremost thing that should be understood about patching up cracks in the facade is that all repair operations are carried out only after the foundation has finally sat down. In order to make sure of this, it is necessary to put a plaster patch on the crack. As soon as it stops moving or cracking, you can get to work (for fidelity, it is better to put several patches in different places). The verification process takes up to 1 year.

Expanding the gap for ease of use. / Photo: youtube.com.

When the foundation has sat down, the crack is washed with water using a spray bottle. While the crack is wet, it must be widened so that it is possible to pour the solution inside as deep as possible. A grinder with a diamond disc will help in cutting. A crack is cut at an angle of 15 degrees on both sides. Don't forget to use safety glasses.

READ ALSO: How quickly mushrooms appear after rain, and how much they grow

We introduce an insulating composition. / Photo: youtube.com.

The place of work and the crack are cleaned from dust with a spray bottle and water. Once the wall is dry, you can start the restoration. We knead the tile glue and drive it into the crack with a pistol. After filling, we remove all excess. As a result, we get a beautiful, neatly closed seam. All that remains is to plaster and paint, after which traces of repair will not be noticeable at all.

>>>>Ideas for life | NOVATE.RU<<<<

It will turn out beautifully, you can plaster and paint. / Photo: youtube.com.

Continuing the topic, read about

A closet without windows, without doors

how to make a cozy room out of a dark closet without windows, in which you want to live.
A source:
https://novate.ru/blogs/010920/55868/