How to make their own hands a device for perfectly flat brick masonry

  • Dec 24, 2019
click fraud protection

(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<

 Laying should be correct.
Laying should be correct.

When you put the brick, it is important to observe the same seam thickness. Cope with such a task without special tools can hardly even the best bricklayer. Simplify your life and work can be here with the help of such a device. It will allow to do almost perfectly flat masonry with all distances. Needless to say that such a thing will significantly speed up the process?

fixture design

The design is very simple.
The design is very simple.

The apparatus consists of two horizontal bars 11h25 mm size, two horizontal bars 19h40 mm size, as well as four vertical bars size 19h40. The structure also comprises two rods of 10 mm diameter lambs, bolts and nuts.

Nothing complicated in this thing there.
Nothing complicated in this thing there.

They connect the vertical slats. For fastening of some parts used finishing nails 40 mm, the ends of which bite on the inside parts. Finally, there are two screw caps with diameter of 20 mm, with nuts and washers for them.

It will be very useful in their work. Advertising.
It will be very useful in their work. Advertising
instagram viewer

The total length of the structure is 850 mm. Horizontal strips are placed on the basis of the letter "L". Land tool edge to the vertical strips have a length of 130 mm. The height of the bars over the entire structure - 100 mm. The whole construction should be varnished to protect against moisture which may fall out of solution.

Principle of operation

Everything is thought out to the smallest detail in the instrument.
Everything is thought out to the smallest detail in the instrument.

The solution is applied to the clutch, and then is leveled at the level of the tool bars. The tool
stretches ahead. Departures from the vertical slats are needed in order to work on the edge of the wall.

Do such a thing can each.
Do such a thing can each.

I would like to learn more interesting things? Then look at the cost story of how to provide a second "life" to old things, using the tools that are at everyone in the house with his own hands.

(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
A source:
https://novate.ru/blogs/260718/47231/