Sooner or later, any tree grows old and dies under the harmful effects of parasites, fungi and other misfortunes. In order for such a plant not to pose a threat to others, it has to be felled with an ax or a saw. This problem is especially relevant for fruit trees. After any of them, a stump remains, which can spoil the view on the site or simply interfere. Many owners do not want to make compromises and refine the rhizome. However, uprooting is not easy work. Therefore, you can approach the solution of the problem from the other side.
In order to cope with an old or even fresh stump at a summer cottage, it is not at all necessary to resort to the help of heavy equipment and uproot the annoying residue. With the proper desire, you can completely get by with "little blood". A conventional drill with a wide (sheet) drill for wood will help to remove the stump in the garden or near the house. This method will require minimal physical effort.
The first thing to do is to arm yourself with the mentioned tool and drill several holes in the stump perpendicular to the ground. Then several more holes should be made, but already parallel to the ground. Moreover, parallel and vertical holes must be connected to each other. This is necessary to ensure air flow. Further actions to eliminate the stump are reduced to one of two ways.
Method one: use fire. Everything is extremely simple here. We put the burning fraction (rags, hay, oil, gasoline, diesel fuel, etc.) in the created vertical holes and set it on fire. As a result, if the holes were made in sufficient quantity and quality, the stump will burn by itself. At the same time, it is important to remember that the burning remnant of the tree must be constantly monitored so that the fire does not go where it is not necessary. In the end, it remains only to work a little with an ax, chopping off the burnt roots and remove coals and ash.
READ ALSO: What to do to prevent the water in the barrel from blooming on the site: 3 simple and effective rules
Method two: we use mineral supplements. Urea, saltpeter, vitriol and kitchen salt will help get rid of the old stump. The reagents are poured into the holes made. With sufficient concentration, any of the listed substances will quickly destroy the structure of the tree. Moreover, each hole into which the mineral additive was poured should be sealed so that the rains do not wash the composition out of the stump. It will take about 3-5 months for the stump to become weak and rotten, after which it can be removed with a crowbar and an ax. Of course, this method is best used before the start of winter, after the entire crop has been harvested.
>>>>Ideas for life | NOVATE.RU<<<
If you want to know even more interesting things, then you should read about what to do so that the water in the barrel on the site does not bloom: 3 simple and effective rules.
A source: https://novate.ru/blogs/211020/56461/