Beautifully designed garden paths will not only make movement around the territory as comfortable as possible. But they will also give the site a well-groomed, aesthetic look. It is easy to make them from scrap material.
I recommend reading: How to effectively get rid of a currant kidney mite
Filled paths
One of the simplest options is to fill the track.
Most often used materials:
- pebbles;
- gravel;
- crushed stone;
- asphalt crumb.
This method has several advantages:
- budgetary;
- environmentally friendly;
- prevents the growth of weeds;
- the track does not become limp during heavy rainfall and after the snow has melted;
- looks aesthetically pleasing.
Before proceeding with the filling, draw a sketch. It indicates where the main path will pass, and where the secondary, uniting zones.
Sequencing:
- Measurement is carried out.
- Make the markup. Take some wooden pegs, rope and tape measure. Indicate boundaries.
- Using a shovel, they remove the top layer of soil, deepening 30 cm.
- The bottom of the formed ditch is reinforced with agrofibre or geotextile.
- Pour 15 cm of river sand. Spill and tamp thoroughly.
- The selected material is filled in.
- Leveling.
A border is made around the edges. Ready-made blocks are purchased in a specialized store or use old bricks.
The fill track requires periodic maintenance.
It consists of the following activities:
- removal of sprouted grass;
- pouring stones in those places that have subsided;
- leveling with a garden rake.
Such paths in landscape design complement:
- willow fences;
- red clinker tiles of fine fraction;
- large boulders.
Islets with conifers and undersized perennial shrubs look spectacular.
Landscape designers do not recommend making dump paths too winding and with many branches - this creates a feeling of congestion and clutter ..
Pebbles in the frame of the pool look appropriate.
However, this coating also has disadvantages:
- If the weed is not removed in a timely manner, it will completely absorb the path.
- It is necessary to clean the fallen leaves.
- Frost covering stones in winter is removed along with some of them.
Tracks made from scrap materials
In addition to stones for the manufacture of garden paths, materials that are at hand are also used:
- concrete blocks;
- garden bricks;
- pallets;
- boards;
- cuts.
In the garden and near the flower beds, paths from the bark of coniferous plants look spectacular. The material prevents the growth of weeds and compresses well. It is not afraid of moisture, so it is used near small fountains or artificial ponds.
Old boards or pallets are used to make paths between the beds. They are durable and environmentally friendly. Prevents the growth of weeds and the formation of dirt on the site.
Boards are recommended to be laid on a previously poured cushion of sifted river sand. Additionally installed logs will help to strengthen the structure and extend its service life.
When making a path from wood cuts, they are pre-treated with antifungal agents so that the decay process does not begin. This material plays well with irregularities on the site - slopes and descents.
Decoration of garden paths
You can effectively complement garden paths with the help of plants planted along them:
- marigolds;
- petunias;
- carnations;
- miniature roses.
Some experienced gardeners install several metal arches in a row and let climbing plants through them, which form a picturesque tunnel.
Most often used:
- climbing roses;
- curly grapes;
- clematis;
- morning glory.
Along the gravel paths, a hedge looks good from:
- thuja;
- cypress;
- juniper;
- oil.
Beautifully designed garden paths give the plot a well-kept look. Help protect the area from weeds and dirt. They are made from scrap materials and effectively supplemented with plants.
Do you know how to beautifully create a garden path from scrap materials?
Original articleand many other materials, you can find on ourwebsite.
Read also: How to properly feed plants with urea