I'll start today's article with a common but mistaken opinion. Many believe that artesian water can be obtained at a certain depth. Here you dug a 100-meter well, and the water there is artesian. In reality, everything is different.
We will analyze in detail what kind of thing it is - an artesian well, how to drill it and what is needed for this.
First of all, an artesian well is a water source. It is drilled into the ground to the corresponding water layers. Artesian water differs from ordinary underwater waters in that it comes out of the bowels of the earth under pressure. Sometimes the pressure is so strong that a fountain forms.
Artesian water does not occur at a fixed distance, but is always at different depths. There are no specific meanings. The aquifers are separated from the surface layers by two sandy horizons. Sandy layers filter water, prevent rain and groundwater from entering it.
Therefore, artesian water is clean, its benefits for humans should not be underestimated. If you regularly use such water, your health will be much stronger, there will be a surge of strength, energy and vivacity.
If the sandy layers are not dug, it is impossible to get to the artesian water. Often their thickness is 60-70 meters. In some cases, this figure can increase up to 300 meters.
The depth of occurrence of the purest and useful water depends on where the source is located, what composition the layers of the earth have, etc.
I propose to operate with approximate values. On average, the minimum depth of an artesian well is 100 meters, and the maximum can exceed 1000 meters. If you have drilled into some water, but cannot understand if it is artesian or not, do some research. Study the composition of the earth, the structure of the soil, measure the pressure, etc.
Often people want to dig a well to artesian water. Who doesn't like drinking crystal clear water every day? The advantage of such sources is their durability, because they do not deplete.
In pursuit of a dream, site owners forget about the depth of the well. Some will be lucky, and they will find water already at a depth of 50 meters, while others will not have enough even a kilometer well.
Do not forget that you can only get artesian water with an official license. Otherwise, your actions will be illegal and punishable.
You can find out the approximate depth of water in the following ways:
- 1. Ask neighbors who already have a well on the site.
- 2. Call a team of specialists. They will professionally make a well where you say it.
- 3. Get acquainted with the map of groundwater occurrence.
- 4. Go to geological exploration and request the necessary information there.
The law states that artesian sources are minerals. If you use a well without a license, you face severe punishment. Therefore, get down to business wisely.
Thank you for reading the article to the end! I will be very happy about your like 👍 andsubscribing to the channel.