How to prepare a mortar for laying a stove that will not crack for a long time

  • Jul 31, 2021
click fraud protection
Each owner is interested in the stove masonry standing for many years and not covered with cracks. The type and quality of the prepared solution plays a decisive role in this regard. This is actually not as easy as it might seem at first glance. At the same time, it is strictly not recommended to use a poorly smeared stove.
Each owner is interested in the stove masonry standing for many years and not covered with cracks. The type and quality of the prepared solution plays a decisive role in this regard. This is actually not as easy as it might seem at first glance. At the same time, it is strictly not recommended to use a poorly smeared stove.
Each owner is interested in the stove masonry standing for many years and not covered with cracks. The type and quality of the prepared solution plays a decisive role in this regard. This is actually not as easy as it might seem at first glance. At the same time, it is strictly not recommended to use a poorly smeared stove.
Knead thoroughly. / Photo: brigada174.ru.
Knead thoroughly. / Photo: brigada174.ru.
Knead thoroughly. / Photo: brigada174.ru.

If the furnace has already been built, then before taking on its putty, it is necessary to carry out detailed diagnostics. Most often, a trivial visual inspection of the oven is sufficient for this. When defects are found, they should be noted in some way and the preparation of the solution should be started. In parallel with this, many citizens may have a natural question: what is wrong with using a furnace with open cracks? The problem here is not only a deterioration in appearance and a decrease in work efficiency. The most important thing is that such a stove is fire hazardous.

instagram viewer

Add clay to the cement. / Photo: gips-centr.ru.
Add clay to the cement. / Photo: gips-centr.ru.
Add clay to the cement. / Photo: gips-centr.ru.

Only a few ingredients need to be mixed to create a quality solution. At the same time, their correct selection is of great importance. In general, the formula looks like this: 1 part of cement grade 500, 2 parts of fireclay clay, 7 parts of river sand. Water should be added to the solution, after which all ingredients are thoroughly mixed. It is very important not to make the solution too thin or too thick. The composition should turn out to be plastic and fit on the surface with a thin, even layer.

>>>>Ideas for life | NOVATE.RU<<<<

You cannot use a cracked oven. / Photo: elitedecor.com.ua.
You cannot use a cracked oven. / Photo: elitedecor.com.ua.

The prepared composition is used to treat the entire surface. You can coat not only the damaged areas, but the entire surface of the oven as a whole. This will increase efficiency, improve heat transfer. It is important to ensure that the finishing compound is applied to the entire surface of the oven in an even layer. After completion of work, it is necessary to allow the composition to dry. This may take a day or two. It is strictly forbidden to heat the oven at this time.

The efficiency of the furnace is improved. / Photo: plitkahoff.ru.
The efficiency of the furnace is improved. / Photo: plitkahoff.ru.

Continuing the topic, it is worth reading about how to make a stove from a simple log that will burn for 5-6 hours.

Write in the comments what do you think about this?

Source: https://novate.ru/blogs/031220/56984/

IT IS INTERESTING:

1. 5 huge ships of our time, in comparison with which the Titanic looks like a lifeboat

2. Why is the railway track made wider in Russia, and narrower in Europe?

3. Summer resident coated the house with 5 thousand bottles and reduced heating costs