1. Cleaning cured polyurethane foam
Polyurethane foam is a very useful tool for numerous repair tasks. It is simply irreplaceable when installing windows and doors, providing thermal insulation and leveling various surfaces. However, it also has its drawbacks. One of the main ones is that if the foam gets into an unwanted place and dries up there, then it becomes extremely difficult to wash it. The usual construction tools do not help, but the usual from the pharmacy is very useful. You need to buy Dimexide, but use it exclusively with gloves, otherwise there is a high risk of damaging the skin on your hands.
To make sure that the pharmaceutical preparation does not spoil the soiled object itself, it must first be applied to a small inconspicuous area. If everything is in order, apply to the dirt with a brush and let it stand for a while. After that, the foam is easily rubbed off with the hard side of the sponge.
Helpful advice: Dimexid does an excellent job not only with cured polyurethane foam, but also with dried superglue.
2. Organizer for small things
To make an organizer, you will need several common lids for kitchen jars, a base in the form of a rod and a few nuts. Use a drill to drill holes in the center of each cover. After that, they are put on the rod and secured with nuts. You can put small magnets on each side under the lower part of the lids, then everything that will later lie in the lids will not crumble anywhere, even if the organizer turns over. And it is convenient to store nuts, drills, nails, screws, screws and other components for repair in it.
Helpful advice: To make the nuts better hold the lids, it is recommended to additionally put enlarged washers under them. This will provide additional rigidity.
3. Scotch tape dispenser
To make a homemade scotch tape dispenser, you will need an ordinary tin can, or rather, its leveled surface. You need to cut out a part from it, which will later turn into a dispenser. In addition, you will need an elastic band and a small plastic tube, for example, a cap from a felt-tip pen. The elastic is threaded into a tube, which is then placed under the inside of the tape.
The rubber band fixes the tin part, the shape of which adjusts to the scotch tape.
4. Fixing dents in wood
Small dents often appear on softwoods. If you need to remove them, then you have to sand off a fairly thick layer of wood. This is a rather long and laborious process that can be replaced with a simpler and more effective solution. All you need is an iron. First, put a damp cloth on the dents - this can be a terry towel or several layers of cotton cloth. After that, using an iron, you should steam the wood: this way its deformed fibers will return to their original position.
5. Useful invention from a syringe
An ordinary medical syringe and a piece of heat shrink tubing can make an excellent practical oiler or glue container that will penetrate even the most difficult to reach places. We put the heat-shrink tube on the syringe without a needle and use the temperature to shrink it. Pour the necessary liquid into the syringe and you can use it.
6. New property of masking tape
Masking tape is useful for more than just repairs. It should be taken with you both on a hike and on simple outdoor recreation. If you cut small pieces from it and form balls from them, then they will become an excellent basis for a fire. Masking tape burns very well, lasts a long time and does not go out even in strong winds.
>>>>Ideas for life | NOVATE.RU<<<<
7. Alternative to clamps
Clamps are a useful tool to help hold parts firmly together. However, not every house has them, and if there are, some are not enough when the renovation is in full swing. Ordinary plastic ties can be used as an alternative. The main thing is to tighten them tightly.
Unfortunately, professionals sometimes also make mistakes in their work, or forget about something important. For example, how to prevent the tiles on the porch from peeling off.
A source: https://novate.ru/blogs/100321/58131/
IT IS INTERESTING:
1. Why are cardboard and plywood houses being built in American suburbs?
2. Why do American men wear a T-shirt under their shirt?
3. Hidden features of the indicator screwdriver, which would not hurt home craftsmen to know about (video)