1. Remains of corrugated board
If after installing the fence there is an unused profile left, put it into action. First, measure the width of the gap between the ground and the fence. Then take a grinder and with a 1 mm disc, cut pieces of corrugated board with a margin of 5-6 cm. Drive small pegs (lightly) around the fence to secure the material. Place the profile strips on the inside of the fence. After a while, the corrugated board will settle down and the pegs can be pulled out. In addition, the material can be easily replaced in a damaged area without dismantling all sections of the fence. Advice: if you know in advance that there will be a gap, order more corrugated board to close the cracks.
2. Earthen embankment
In the case when the opening between the ground and the fence is small, it is easiest to use ordinary soil without any additional materials. Build an embankment on either side of the fence all the way to the fence, tamping down the soil a little. Over time, green grass will sprout in the soil, which will hide the bumps. Instead of earth, you can make an embankment of fine gravel. However, this method also has several disadvantages. Firstly, due to frequent rains, the earth can be washed out, so you will have to periodically update the embankment. Secondly, stray dogs or moles can dig up the ground to get to the site.
3. Wood
Another option is to close the cracks around the fence with boards. The wood can be of any thickness. Pre-treat the boards with a special antiseptic to prevent damage to the material. The wood can be painted to match the fence or made in a contrasting color. Align the boards to the level and fasten with bolts or self-tapping screws on the posts placed around the entire perimeter.
4. Curb tape or mesh
To close the gap, a steel wire with a plastic interlayer, a chain-link mesh or a mesh with reinforcing inserts will do. The main advantage of materials is that they do not rot, and therefore do not attract pests. Before installing the fence, dig a 15 cm deep ditch around the entire perimeter of the fence and place the posts in it. Cut the selected material into pieces according to the distance between the supports. Remove the self-tapping screws with which the lower parts of the profile sheets are screwed. Place one part of the net at the bottom of the ditch, and place the other, the top, between the sheet and the log. Screw the screws back in and fill the ditch with rubble.
>>>>Ideas for life | NOVATE.RU<<<<
5. Slate
Strong material will help hide the gap under the fence. The main thing is to position it so that the wave repeats the direction of the profiled sheet strips. Dig the slate into the ground and press down with pegs for a secure fit. Treat the material with a parasite repellent. You can also paint the slate to match the color of the fence.
Thus, corrugated board, wooden boards, slate, metal mesh and even earth will help get rid of the gap under the fence and give it a more aesthetic look. We also recommend reading about 4 options on how to decorate a neighbor's fence so that it ceases to be an eyesore.
A source: https://novate.ru/blogs/290321/58383/
IT IS INTERESTING:
1. Why you can't try to climb the platform if you fell on the rails in the subway
2. Why do American men wear a T-shirt under their shirt?
3. Summer resident coated the house with 5 thousand bottles and reduced heating costs