(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
Every handyman at least once in his life faced with such unpleasant phenomenon as lapped screw. Unscrew it is necessary, but does not work. Moreover, any attempt to insert a screwdriver into the slot residue grasp and turn a screw only further exacerbates the situation. All this can be very upsetting and puzzle master, but this problem has actually got quite a simple solution.
To unscrew the screw lapped, you will need quite a bit. First of all need a small piece of rubber. Suitable for "rescue" and any other rubber material. Examples of such materials: rubber balloon, medical tourniquet slice chamber to a bicycle (or any) of the wheel. Rubber will need to cut a small rectangle.
Now put the material lapped over the screw as a screwdriver to be abutted against and accurate, sure movements begin to twist. Mindful of the fact that you have to devote more effort to the top. After a few turns of a screwdriver with an elastic band can tread face. In this case, simply transfer it to a new site, the tool does not slide.
Continuing the theme Modular universal tool, which by virtue of any task and not only.
(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU<
A source: https://novate.ru/blogs/290418/45991/