Still throwing plastic bottles? Do not underestimate such a container, because of it, you can create original compositions at their summer cottage. We will share with you a simple but at the same time interesting ideas crafts that you can make with your own hands.
This and many other materials can be found on ourwebsite.
Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.
Flower beds
An integral decorative element infield considered flowerbeds. To make it look impressive, alone beautiful ornamental plants will not be enough. You need to consider what will be the frame of a flower bed. Budget and easiest option - a design made from plastic containers. You can build one "fence".
Prepare capacity (size should be the same). Cut them at the same height from the bottom. Dug in each of them into the ground so that the neck faces downwards. Give fence shape in its sole discretion. If more effort, you can make a flower bed in the shape of a flower.
Proceed according to the scheme:
- Cut container to the middle.
- Take the tip of the bottle and from the bottle cut "petals." For such manipulations, use a knife or scissors.
- Wrap the cut parts inside.
- Capacity dug into the ground so that the neck faces downwards.
Tip! To flower garden was bright, colorize it with oil paint for exterior use. Fill them with flowers only to complete drying of the composition.
garden paths
On the creation of garden paths need to work hard. We'll have to stock up on the necessary material to carry out a series of actions to secure land. All this involves a serious time and cost. However, without a path on the plot is difficult to do, but you can build it, using all the same plastic container. To arrange tracks refer to the following scheme:
- Dig a trench at a depth of 1.5 bayonet shovels. Install a supporting structure made of wood.
- Lay on the trench bottom gravel and sand (thickness 3 cm). Seal the mound.
- The filler sand container use. Place it in the trench so that the necks were directed to the edges of the path.
- Mix the cement composition. Pour the solution in a thin layer portions between the elements.
- Once the composition begins to harden, remove the formwork. Before you fill the free space with cement mortar, lay them on the board and walk around the deck. Thus you will be able to seal the structure. Caps do not dispose of their use as a filler for the empty seats.
decorative installation
Large installation of plastic - bottles perfect solution to decorate a garden plot. Over their creation will have to work hard, because it is not an easy task. If you do not have the skills, you can make a plastic animal figurines. Involve the matter little helpers, to be sure, children will be delighted by the idea.
We suggest that you start with a funny pig. For figures require a flask, capacity 5 liters (torso). To prepare the four legs of the neck 0.5 liter containers. Cut in half a bottle of 1.5 liters for the ears.
The largest of the tanks roll in the sand. So it will be firmly fixed in one place. Make slits, insert the prepared parts. To fix, use tape or glue. To make the eyes take two beady black. Prikopalis figure and razrisuy colors.
Plastic bottles - a perfect base to create bunny figurines. Take a flask of elongated shape and two 1.5 liter capacity for the lugs. Fasten elements draw on the installation legs, eyes, nose and mouth. Fill a flask with sand and dug into the ground.
Tanks for the cultivation of plants and irrigation
Of plastic packaging can make not only decorative elements, but also those who will be practicality, for example, tools for cultivation and irrigation. Cut the bottle Take the lower part of the half, pour it into the ground, will land a plant. In the resulting pot do the tiny holes for drainage. Obkleyte his covers of bright colors, razrisuy colors.
You can also make bottles of hanging pots and attach them to the construction of the wall, using fishing line. Articles made of plastic for irrigation are good because they are sturdy and durable. Pierce the bottom of a flask (4-8 openings). Attach the upper part to the hose. So you got the convenient spray device.
Bottles can be used for subsurface irrigation:
- Cut at the bottom 2 liter bottles.
- Make 2-4 holes in the cap (diameter up to 2 mm).
- Under villa culture, at a minimum distance of 10-15 cm from the stem, scoop hole 10 cm in depth.
- Insert the container so that the spout faces downwards (at an angle of 30-45 degrees), dug in the ground.
- Pour into water bottle - through holes gradually seep to the roots.
Old bottle of plastics - the ideal basis for the creation of useful devices for questioning. Prepare everything you need, inspired by photos and proceed to the creation of original crafts.
This and many other materials can be found on ourwebsite.
Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.