growing plants in greenhouses are engaged in many vacationers. The advantage of this kind of devices is that they can be used to get an early harvest. Simplified construction consists of a frame and a coating film. After the arc will be installed, you need to secure the fabric so that it was not torn by the wind.
How to hide and secure the film on the greenhouse
Instructions for securing the film to the frame:
- Do not cut out the rolls prior to the work. Perekin'te roll through an arc.
- Tighten the belt so that was a reserve for the fasteners (20-25 cm) on both sides. Cut off the desired piece.
- Repeat, closing overlapping the empty seats on the frame.
- Spread out on the strip surface. For gluing parts, use tape.
- Place and secure the frame.
- Now cut out the details with the end margin. They also need to fix.
- Cut the workpiece and vent door and fasten.
Tip! To securely sealed with tape details on the bonding areas have to apply a degreaser.
On how to correct will be done fixing the film depends on the duration of the life of greenhouse arcs. If his skeleton is made of metal pipe, it is necessary to wear a plastic pipe cutter or an old hose.
On the profile, you can pull the white cloth. Thus polyethylene manage to protect against overheating in the locations where it is contacted with a metal surface.
Typically, the web is fixed by gardeners strong fishing line or cord. The thread is fixed in the corner at the bottom on one side of the greenhouse. Further, the stretched form of its raised upwardly from one edge to another (in a zigzag manner).
Exactly the same manipulations necessary to perform inside the structure. The film must be stretched between the fishing line.
Other methods:
- For the design of the plastic pipe pieces require pipes of larger diameter.
- For reinforcing structures using binders.
- If the arc made of wood, the film can be fastened with nails or screws. To a polyethylene fabric is not damaged, fix its wooden plates.
Tips for shelter Greenhouse
That your greenhouse a durable, keep the following guidelines:
- Calculate the amount of coatings. Available film presented in rolls. If you know the width, as well as the parameters of the greenhouse, you can easily calculate the length that need. In roll coating must be double-layered.
- If you plan to exploit the design from spring to late autumn, give preference to the coating in the form of a reinforced film. For firmware cellular fabric used plastic thread, which means that is characterized by increased strength and resistance to adverse external factors for him. In all other cases, allowed to acquire the material budget.
Tip! Strong winds can damage the coating, so it is advisable to purchase the canvas with a reserve.
Cover the frame the film web after it is dug in and fixed in the soil. It is desirable to carry out such work in warm calm day.
original article other materials can be found on ourwebsite.
Please put the Huskies and subscribe to the channel "About Fazenda". This will enable us to publish more interesting garden articles.