I welcome you, dear guests and fans channel!
Yesterday came across a single nerasklyuchennuyu box which missed during installation... and a soldering iron either, by which I made all the boxes of his house. I remembered that a few days ago gave his younger bratelnik ...
Do not leave the same twist in the ceiling! Called friend linemen - consult how to be. It is necessary to continue the work, the floor of the second floor as in any way. Familiar and told me that option.
For soldering needed a standard set (flux, solder), but instead of a soldering iron, - gas burner.
Stranding produced in any known way for you.
Further, the burner is adjusted to the most basic combustion mode. And for 5-7 seconds. warms tip twist. After warming up, the second hand solder a wire tray and he begins to melt and spread, filling all the gaps. It occurs in 2-3 sec., Until the twist is not cool. So two - three times.
Further, when you see that the whole twist "soaked", you can once again slightly warm it to solder a few wires enveloped.
But most importantly do not overheat!
1. If you do not control the heating, the temperature to melt the insulation.
2. Because of the strong warming, the solder begins to flow out of the twisting and dripping (on foot).
To sum up ...
The idea is good, but the quality seemed to me not very good, maybe because of the external wires is not covered with solder, although he penetrated completely filled the space inside the twist! To verify this, I bit the end spikes.
This method does not allow to make a spike in large boxes with the short ends of the wires, because the heat from the flame spreads far and is likely to touch the insulation surrounding the wires.
And so, the way to an effective, satisfied!
____________________
If you like my article, place and Likesubscribe to the channel!
How to determine the height of the object, not hanging onto it with a tape measure?
Why has the metal frame size 11.7 m.?
Why not open the ball valve by half?
How fast do twist the wires? Device for 5 minutes.
If the diagonals are equal, it does not mean that you have even a house!