Accumulated over time cutting PVC sewer pipes without purchased couplings are virtually useless. But they should not be thrown away. Today I'll tell you how you can apply an unusual way data connection scraps. Thanks to him, your pipes will be applied and will serve you for a long time.
This method did not require any tools. One need only spend 2 - 3 minutes, and your pruning pipes will serve you on an equal footing with new pipes intact.
stage 1
To start, you need to determine and decide which of the two will be scraps socket. Now, at this pruning pipe desirable to remove the chamfer on the inside of the tube. At the second cutting chamfer is also removed, but on the outside of the tube. This action, of course not mandatory, but it is much easier for you to compound your pipes.
step 2
Heat the end of the pipe on which the socket is in boiling water over a gas oven, dryer construction or the flame fire.)
We applied for this article methods of heating in boiling water. Pour into water pan, that it be concealed end of the tube at least 5-6 centimeters. We are bringing it to a boil. Then in boiling water omit the pipe end.
Keep the tube in boiling water needed for at least 2 minutes. Warming up the pipe end over a length not less than 5 cm. This is sufficient for the formation of the socket.
After heating another scrap pipe chamfered at the outer portion is gradually inserted into the preheated tube. For some movements due pipe chamfering enters the heated end to a depth of 5 cm.
This method makes it possible to heat the plastic heating only to 100 degrees, so before starting the experiment, I had no confidence that will connect the pipe to the desired depth to us. But it was a lot easier. Of course it took effort to connect pipes, but an order of magnitude smaller than I expected.
I am confident that with the help of a hair dryer to warm the pipe construction to get much stronger, and therefore the connection of pipes will be much easier. Those who have the chance, try it and see for yourself. If it is easy to accomplish your goal in the comments.
After connecting and cooling pipes, I would advise you to the reliability and integrity fluff joint silicone sealant. Although this compound is obtained without a sufficiently strong and tight.
Rate this article and sign up Canal.