Now the bath at the site wants to place virtually every owner of a private house, which has at least a little space. The only thing that can stop - the lack of funds. Still frame from logs or a box of gas silicate, and even to the sewage system, running water and a heater, goes into considerable penny lover wash steam.
However, whether the bath requires such thorough investments? Companies erecting pair of different configurations, assure us that the very attempt to make the bath - havedomy failure.
The technology will be broken, time spent, and the appearance is no. Here everything is clear: every merchant wants to sell their products, and to conduct appropriate information campaign. But in reality, there are examples, and they are many, when a home-made development successfully operated more than one generation of fans to warm up.
The simplest homemade bath
We are not talking about going back to Cournot baths of ancient Slavs, which after kindling could not come until the smoke erode. No, design, though simple, but includes a conventional iron stove on which is installed a homemade stove.
Chimney through the roof. Of course, such a substantial savings is based on the lack of amenities. For example, in the bath without tap wiring and not to carry buckets, through the wall of a simple rubber-reinforced hose with a tap inside held.
Sex in the bath pouring, that is able to save even one expensive system - sewer. Under the bath dug a small hole where the water is going to be dispersed over the site. Gravel layer allows water to leave the soil even during everyday use.
Bath was built in 1979, when neither of which abundant materials were not discussed. It suited all that could fit. As light construction foundation pillars made of asbestos, dug in the corners. It goes on top of the rail timber section 100 to 100 mm. On this basis, the frame is assembled. It consists of thin bars 75 to 50 mm, fasteners - nails. Inside and outside the cage is lined with conventional greenhouse film, only folded in half.
In this space is filled dry layer of sawdust as a heater. From the outside on the strap and nails packed another layer - the felt roll 10 mm thickness. Outside and inside an ordinary bath trimmed board-shalovkoy (if you want to add aesthetics, take battens). Gable roof, insulated with sawdust and covered with slate.
Over 40 years of active exploitation of the bath in summer there have been only two repair: change the rotten floorboards and carefully stitched the bottom portion of the interior of the board, which also fell into disrepair against splashing water.
Despite the appearance of out-of-date, this example shows that not necessarily spend a lot of money and attract for the construction of baths contractors. The phrase from a joke "you have cheap or go?" It is perfectly suited to this situation.