Perhaps a steamy mirror faced every person who is a mirror in the bathroom, and that takes a hot bath or shower. Furthermore, the glass covers impenetrable veil thereon and drops still roll on which in the future, already cooled down mirror remain unsightly track.
However, to solve this problem there are a huge number of ways. If resources permit, you can build the bathroom ventilation system and enable it every time when you plan to take a dip in the hot water. If you already have a ventilation system, and the mirror is still covered with a film, then it is possible to install an additional electric fan.
Mankind has for a long time there is a special device for the mirror itself, which by controlling the temperature of the glass does not allow him to fog. It looks like a small cord, two feet in length, which has a thread. Cord attached to the back side of the mirror and connected to the outlet.
If you are going to deal with this problem without the high cost, then there is a more economical way.
To begin, wash and wipe the mirror, but so that it was no divorce from the water. With a dry glass cloth mash few drops of shampoo or shower gel, and then clean cloth wipe mirror until the moment it will not stain soap. Usually enough shampoo for a few weeks, and then have to repeat.
The second way, Which is used quite often - it's soap.
Again, you have to thoroughly wash the glass, even a special tool, it is desirable to do it for washing dishes, and then grind laundry soap on the glass, and then a chamois cloth (preferably as suede fits best) wipe it until dry and reflective state.
All the same can be done with shaving cream.
And yet another way - vinegar. Mix equal amount of vinegar with water and pour into a container means obtained with a sprayer. Spray the mirror, and then wipe, preferably cotton cloth.
And if for some reason you do not want to spray the vinegar, you can dilute 5 drops per 500 milliliters of water, and then wipe the glass with a solution.