Gazebo of classical treated wood decorate the garden, is a great family vacation area in the countryside. Beautiful view of the structure will create and equip a life of suburban buildings. Where you can spend time to barbeque, reading, escape from rainfall and bright and hot sunlight.
The article is an example of the construction of the gazebo in the garden area. Showing solutions for structural elements of buildings.
Pergolas
On sale are 3 types of ready-to-assemble wooden pergolas:
1. rectangular;
2. hexagonal;
3. octagonal.
Kitting and Assembly
Select your team from the finished or processed wood materials is determined individually. Faster, more reliable and easier to mount the finished building itself. Building construction even simpler form of the structure is not complete without the construction of the foundation. Profitably make a foundation of concrete in the area conditions.
Materials and tools
Equipment: 0.5 m3 concrete mixer, shovel, cement M 100, gravel or crushed stone fraction 20-30 mm, sand series C1-C3, a bucket, water.
Good reinforcement is obtained by using a reinforced periodic wire diameter of 8-10 mm. Formwork an on strength and quality of the cut board is 20-30 mm thick, 8-10 mm laminated plywood. timbering building in the ground is carried out with wooden bars of 70x70 mm with a pointed end.
Foundation
Installation begins with the foundation base. Withdrawn fertile soil on 1 m more than the structure. The base deepens 0.5 m. Stacked roofing felt and cardboard boxes the size of the foundation 40h20h40 cm. At the bottom of the trenches pour "pillow" of gravel 200 mm, which closely compacted.
Going reinforcing frame. Grid sector makes a long strip foundation. Grid height is less than the top of the foundation 30 mm. Adjustment are placed longitudinal reinforcement 3 F 10 mm. Transverse reinforcement F 8 mm is attached to the longitudinal wire knitting. Step crossmembers 1 m, but not less than 3 over the length.
Planking is going on the readiness of the reinforcing cage. The level of bias is made. On top of the foundation formwork notes. Joints sealed formwork. Mix cement, sand, gravel and water. Ready-mixed concrete is placed into the mold. Concrete gains strength of 70% for 72 hours.
Formwork removed, concrete dried. Bright color of concrete shows its willingness to priming and painting. Neat appearance of the foundation is done by grinding. Foundation color or cover with decorative stone.
Assembling the gazebo
Placed on top of the foundation of the bar joists 70h120 mm. Antiseptics covered by 2-3 layers. Step laying lag 1 m. Sexual rail laid across a log. Racks put at the corners of the structure. Are attached to the base. Intermediate rack bars are placed on 5 pcs. with the same pitch. Design solution for skin gazebo selected individually.
Left and right of the entrance to the gazebo placed flat balusters 6 pcs. Ready sill put on top of the intermediate posts. pergola frame with rails mounted along the length of the arbor 3 pieces. on 1 side. Rafters 50x100 mm beam width placed 1 m apart. Sheathing roof board business. The coating material of the roof and are individually selected color.
Subscribe per channel, and we will tell you all the secrets and subtleties of repair, which will help save money and speed up the process.
See also: Eliminate fogging a mirror in the bathroom. Prescriptions and recommendations.