The best material for the construction of baths since ancient times was considered a timber. This is not surprising, because this material was distributed almost everywhere.
However, the modern market offers a huge range of different materials for the construction. For example, a worthy substitute for wood in the construction of a bath has become a brick.
What is special bricks?
Since many brick is unconventional materials used for the construction of baths, will properly consider all its advantages and disadvantages.
Benefits
- Refractory material. From the point of view of fire safety Brick holds a leading position in comparison with other materials;
- Durability. Bath brick (with proper care) will stand you have 50 or even 70 years of age;
- Environmentally friendly material. Brick is made of natural-based, and therefore is considered the most safe for humans;
- A wide range of design solutions. Panel allows you to build not only the usual "bath-box", but also the construction of more complex forms.
disadvantages
- The high heat capacity. Brick bathhouse is necessary to melt a lot longer than the bath made of wood;
- hygroscopic material. If you have decided on the construction of a bath from a brick, you should immediately consider further waterproofing of buildings;
- High price. The cost of a brick is quite high in comparison with other materials. For the construction of the bath is only suitable red brick, because it is the most resistant to high temperatures and has a long service life;
- It requires a solid foundation. For brick construction of a bath you need a more stable foundation.
Construction bath brick provides several options for wall installation. For example, an excellent option is kolodtsevoy masonry (it will help insulate the walls from the inside). It is also possible to build and mount thin wall insulation on the outer side of the structure.
Do not choose the type of solid masonry. Bath requires a very thick walls, and because solid masonry lead to a waste of material. Given the cost of bricks, you are such a construction will cost much more expensive.
Fundam for brick baths
For brick baths require the installation of a solid foundation. It is best to give preference to the monolith.
Process for casting monolithic bath:
Step 1. Dig a trench along the perimeter of the construction site.
Step 2. Pour all of the sand layer.
Step 3. Place the fixture.
step 4. Pour the concrete mix (pre trench must be set to the formwork).
Other channels of the article:
7 inviolable precepts in the bath
Bath for the joints - the benefits and harms?
Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!