How to install the stove in the bath: instruction for beginners

  • Dec 24, 2019

Furnaces for baths come in different designs. Widespread today received a metal furnace for a bath that can be installed by hand.

Advantages of such a furnace is, first of all, compactness: it easily accommodate even a small steam room size, and the heat that it gives, with more than enough for the average room.

Iron stove is good because it comes already finished construction. It does not need to build like a brick oven, it weighs much less. All that is required - it is competent to choose the location, mount the chimney, and you can bathe. It is only important to comply with the order of work and adhere to the rules.

Step 1. The choice of location and location. Iron stove is heated strongly during operation. Since most of the baths built from timber and logs, furnace should be located at a sufficient distance from them. From the walls - at least half a meter. From the wooden ceiling - 1.2 meters. There are compact versions in which the fire door opens directly into the steam room.

This option is fraught with soot on the floor, as well as burn oxygen. Therefore it is better to arrange the furnace exit door to the rest room, dressing room, large baths - in a special furnace. In small bathhouse door output out - uncomfortable, but safe and space-saving. The wall through which the fuel exits the channel, should be nonflammable and from the floor to a height

instagram viewer
25 cm above the door.

Step 2. Once chosen the place, you need to prepare the ground. Despite the small weight of the kiln, the floor will be more push water tank, stone, brickwork, for a total of 600 - 800 kg. If the floor is made of logs, mind necessarily requires strengthening.

If it had been taken at the design stage, it is necessary to provide for its subsequent construction. Top is made masonry thickness of two bricks. On top of its beauty can be decorated with granite. Under the door leaf installed predtopochny - a copper, brass or steel.

Step 3. In the wall, which is conveyed through the fuel passage, do cutout electrical or gasoline saw. Received hole obkladyvayut refractory brick red. Output flue obkladyvayut also refractory materials. It is best to display it through a pipe with knee bend, which will be held in the wall.

Other channels of the article:

7 inviolable precepts in the bath

Bath for the joints - the benefits and harms?

Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!