In order to choose the best material for the walls of the bath, it is necessary to take into account the functional characteristics of the premises, as well as the owner's preferences. There are many low-cost and high-quality materials.
In this article we will talk about the most popular ones, will reveal the pros and cons, as well as explain how to take the installation of a cover.
log sauna
Suffice common variant of finishing, which has several advantages, which include the following:
1. Storing optimal mode of humidity and temperature. Such an effect is observed when using softwood.
2. Create a unique microclimate. Due to the ethereal vapors that come out of the wood, the room saturated with special substances which favorably affect the overall health.
Installation is performed by using round logs with a diameter of 22 to 26 centimeters and which must have special slots. These logs are stacked on each other so that covers the top groove of the lower timber. Between such compound must be a layer of coarse fibers. To avoid misalignment due to different diameters of the material at the ends, the logs are stacked so that the bases were pointing in different directions. angles compound can be carried out with a gap, and without it.
brick bath
This material is one of the most common.
He gained wide popularity due to its relatively low cost and high consumer qualities. The disadvantages are minor heat loss, as well as exposure to otmokaniyu. To rid themselves of these drawbacks is necessary to make a separate layer from the air, a width of 5 to 7 cm and put in a cavity of the insulation. This simple technique will protect your bath by excessive formation of condensate and will maintain the temperature at a desired level for you.
Masonry brick carried out in standard manner as in ordinary homes. The interior space is stitched tree, you can choose almost any species of wood. Best of all conifers fit.
Wall panels
It is the most modern version of the material for the construction of walls. The main advantages of this material include its durability, ease of installation, as well as their low cost.
Installation is performed as follows:
1. Mounted wooden frame.
2. On it is fastened to the boards.
3. On top of the resulting design fits vapor barrier.
4. Fits second layer boards.
5. The resulting frame is fixed.
6. The outer skin is made of masonry brick or clapboard.
7. Made inner lining material water repellent.
These three options are the most optimal in the ratio of price - quality, and the ease of installation.