Establishing normal mode consumption of firewood in the bath is due to high-quality thermal insulation of the floor. In this article we will discuss the different types of materials that can insulate your floor in the steam room, as well as some of the subtleties associated with their installation.
Variants of materials that conduct heat insulation
Competent selection of insulation - an important stage in the process of keeping warm bath room. Among others, the following options for the thermal insulation of the floor:
Glass wool. It is lightweight and perfectly retains heat. Among the shortcomings noted elevated level of moisture absorption, which entails additional costs for waterproofing.
Styrofoam. Different low cost and resistant to the increased moisture content. The same material is easy to install and maintain.
Expanded clay. A material which has an impressive lifetime is completely environmentally friendly and safe for human. The basis of the slag mixture are screenings and clay. Such a heater is mixed with cement and poured under the floor.
Penoizol. It is a polymeric foam, which easily can be filled with all kinds of irregularities and gaps in the floor covering. Most often used for insulation of the wooden floor.
Perlite. This material, when mixed with cement and water, receives additional mechanical resistance. Of the advantages may be mentioned low weight and low cost. The material used as the intermediate stratum when installing concrete screed.
Stages of warming the floor in the sauna room
For these purposes, all of these materials are used. The base of the deck in the sauna room requires practically no insulation because the optimum temperature range. Distinguish the following stages of the installation of thermal insulation:
1. Fixation is made of wooden beams, Laid rough ground.
2. On this base materials are set to protect against high content of steam and moisture. For this purpose, effectively used film of polyethylene or a special membrane. Fixing is carried out by means of staples in such a way as to ensure a normal level of tension. To disguise the connection locations using tape or adhesive tape construction.
3. Now it is possible to carry out direct mounting of thermal insulation layer. After the application of which, an optional number of waterproofing. As waterproofing, roofing felt can be used, but in order to handle the seams - mastic bitumen.
4. The final stage is considered to be the installation of lathing, which will allow for proper ventilation and installation of external decorative layer with baseboards.
During the warming bath room, you must correctly select the material that will satisfy you in terms of price and quality. After selection - use our installation instructions, in this case, the insulation will serve you for years to come.
Other channels of the article:
7 inviolable precepts in the bath
Bath for the joints - the benefits and harms?
Helpful information? Do not forget to Like and subscribe "Bath - from A to Z"!