Bath opilkobetona of their own hands

  • Dec 24, 2019
click fraud protection

When choosing a building material for any construction, many are guided by its practicality, heat capacity, easy to install and, of course, affordability. Before you opt for something specific, it is necessary to consider all its advantages and disadvantages. One of the affordable and easy-to-use and most importantly - the heat capacity of the materials is a foam. It is actively used for baths, garages and other buildings at their summer cottage. Advantages and disadvantages of bath arbolita - on.

What is arbolit?

Opilkobeton is a material which is made from cement, sand, sawdust and water in a certain ratio. It is made mainly in the home, using the composition for monolithic building, or poured into separate blocks.

Let's start with the good

Arbolit perfect that provides several ways to use. It can be used as a material for monolithic construction or use separate units, in some cases it is more convenient.

Visible advantages of the material:

  • It does not require additional processing antiseptic compounds, both in the case of the timber;
    • instagram viewer
  • material is available for the price;
  • in the construction of buildings can be handled without assistance;
  • good specifications: the material is durable, teploemok and is not afraid of moisture and other damaging effects of the natural environment.

Fire resistance, high insulation, resistance to rot and durable binder also increase interest in this material.

disadvantages opilkobetona

Against the background of all visible advantages arbolit, as well as other building materials, it has certain drawbacks.

For instance:

  • The walls of the bath for opilkobetona need a good waterproofing. And it is better if it is not water-resistant membrane and mastic resin.
  • To the wall did not damp, plinth of the foundation should not be less than half a meter.
  • In block construction, the size of the elements may vary, as poured out on their own. When the clutch is required to control the level of each block separately. Large differences are compensated by the thickness of the seam, it is not always good: the larger joints, the more cold bridges.

All these disadvantages are not so essential to renounce the use of material.

If arbolita disadvantages recaptured you wish to use it for the construction of a bath, you can consider alternatives for example profiled bar, aerated concrete, bricks, or expanded clay frame walls.

Like this? Put Like and subscribe to the channel, there is still a lot of interesting information!