You can make it easier to repair work and life in general, if you do not get hung up on standard solutions, but look at the other side of the problem. Sometimes the most unexpected, but very simple techniques to help achieve this goal with less time and effort.
1. How to order wire
A pile of a variety of wires, piled in disarray - a familiar phenomenon in any home or office. It spoils the interior, and just annoying when, if necessary, have to look for the right cable. The problem can be solved very simply by using plastic cable ties. To sort them first tightening the wires together one tie. Then retaining coupler intercepts more other couplers by arranging them between the wires, and thus, separating each of the adjacent cable.
2. Non-slip building level
When working with a spirit level on a smooth surface, such as tile can be difficult to make a layout due to slipping. Tool is difficult to fix and it is like "running away" from under the arms. Similar difficulties occur with stability when working with uneven walls. Secure the building level in one place will help pair the most common gums. They wear along the edges of the tool, and it becomes more stable due to better adhesion with the surface.
3. Smooth sole jigsaw
Masters, often working with jigsaw, after some time, faced with the fact that he starts to spoil the appearance of the blanks. This is due to the fact that in using the tool outsole receives various scratches, burrs and subsequently such a rough surface processed material damages.
>>>>Ideas for life | NOVATE.RU<<<<
To avoid this, you can glue the sole of the jigsaw masking tape. She is thin and firmly adheres to the surface, so it will not interfere with the work and protect the surface from scratches blanks.
4. How to drill a hole without dirtying dust wallpaper
When drilling the wall is inevitable formation of dust and crumbs of plaster, which are deposited on the wallpaper and furniture nearby. Simple techniques will reduce the dispersion of such waste to a minimum. To do this, take a sheet of paper or paper of appropriate size and fold it in half so that one part was a little shorter than the other.
Must see:17 "masterpieces" from the mountain-masters, who were not able to cope with simple tasks
Then, the folded sheet is attached just below the drill hole locations, applying to the wall a long side and fixing masking tape on the top and sides. It turns out a small pocket. Upon completion of drilling of its masking tape glued to the dust accidentally woke up, then remove from the wall and thrown out.
5. How to make a mark on the wall without damaging wallpaper
Sometimes you need to measure the length of the wall, but roulette is not long enough or it sags under its own weight. In this case it is convenient to make two dimensions and then sum them, but the question is how to make a mark, to leave no traces on the wallpaper or decorative plaster. Rescue uptime masking tape. A small piece of paste on the wall, make a mark on it, and from that point your measurements in one direction and then the other. Masking tape can be easily removed without leaving a trace, and the wallpaper will remain clean. It is very convenient in the process of measuring the right to record the numbers on masking tape. Thus obtained number is not forgotten, and the tape can be pasted to unstick and working notebook.
Practical advice from the Novate.ru: Masking tape is a great helper to lay out in any situation. For example, mark a hole for the shelves, pictures and other items better to do, paste in the right place a piece of tape. Then, in the case of a label error is very easy to move to another place and the wallpaper will remain clean.
6. How accurately Drill thin sheet metal
Make a neat hole in the thin sheet metal conventional drill it does not always work due to the fact that the cutting tool loses its alignment and edge damage. Avoid such troubles core bit helps, but if it does not, it can be made out of ordinary.
Must see:How to build a cardboard house, which is not afraid of the cold and rain, and going for 1 day
To do this, you need to treat the cutting edge - to deepen it in the middle part, making the lateral undercuts so that they were at 1.5 mm below the drill center. This is done as follows: Drill gently bring to a grindstone, and in the process of grinding the shank is lowered at the same time slightly twisting the drill in a clockwise direction.
7. How to avoid bad smell due to sewage idle
When leaving home for long periods of time, such as going on holiday in the resort or a tourist trip, on his return there is a strong likelihood that the housing meets unpleasant odors from drain. To avoid this, before leaving pour a little vegetable oil in each sewer hole: in the sink in the kitchen, bath and sink in the bathroom.
>>>>Ideas for life | NOVATE.RU<<<<
The oil does not dissolve in water, as its density is less than the density of water, and therefore will float on the surface, preventing water seals from drying out. Thanks to this apartment will not penetrate the smell of sewage.
Useful information on Novate.ru: Bending trap creates a water tube, called hydraulic lock and serves as a barrier that prevents the penetration of sewer miasms. With regular use of water seal in sanitary engineering is constantly updated. But in the case of prolonged inactivity, water can evaporate, especially in the hot season, and then begins to flow from the pipe odor.
bonus:How to return to its original white windowsills, and not ruin them
Shining white windowsill in the house creates a special comfort and a sense of purity and freshness. However, the plastic eventually becomes soiled and yellowing, as a result of the sill loses its aesthetic appearance.
No need to despair, experienced handyman for a long time came up, how to restore the original whiteness of your window sill, without fear of ruin
A source:novate.ru