Anyone interested in welding, welcome on our channel. Today again it is about the welding with the relevant pipes, as it is with them most of all have to deal with in our everyday designs on your site, cottage, garage.
A theme is very interesting, like himself, without an assistant, dock and cook shaped tube suspended.
For example, I took 2 shaped tube piece 30 by 60 mm, one-piece clamp is rigidly secured on its welding table so that one end of the hanging, so to this end we need to dock the other piece proftruby.
For this work I came up with just such a simple home-made in the shape of a butterfly! It consists of two 40-lanes, which are welded together by means of a simple loop elemental design, but a necessary thing!
We catch a butterfly clamp is fixed to the end tubes, but positioned so that the loop is itself onto some distance from the end, look at the picture, as it should be.
We note on the movable plate butterfly line which will go at the junction and the end plate proftruby.
Now take a piece proftruby to be welded to our designated piece of pipe. We combine its end and the line on the movable plate, and the attaching clamp them naturally, trying to expose the ends of the pipes most evenly against each other.
Take the movable portion of the tube and to raise this pivotal connection. Look, what turns a good and smooth joint.
Now we must make a stand for the movable portion of the tube, it is desirable that it was a bit of wood at an angle to the pipe to less slip. This stand, we will adjust the height of the moving pipe.
Expose the movable part relative to the fixed with a ruler, strips, etc., than you will be comfortable. Now put a tack.
We weld follows-boil one side of the half, then the other side boil completely back to the first seam, and cook a little longer until the end, and so with all four parties.
Just the experience of proftruby docking, made the observation that if once fully boil thoroughly one side, then another, then still pull the pipe during cooling to the side of the first seam, and in this way the half-welding, welding after coupling will smooth.
Weld pipe joints, yes, I almost forgot-tack after we remove the clamp and tie. Cooked, removed from the pipe clamp on the welding table and make a visual inspection, it was all smooth and well.
Let's look video with this docking process, maybe I missed something in the article.
Come to your channel tomorrow, and the day after tomorrow! Just Like, add the channel to your favorites, and SUBSCRIBE