Friends, all greetings.
Permanent channel of my readers know that I have worked for many years in welding repairs and modifications of truck trailers. The work is varied and novel, many of which had to innovate and invent on the fly.
Sometimes we had to saw chain grinder, a chain we have used in the system is closed sides, and today I will tell you As the grinder to cut the chain to drive ate nothing. We help stubs electrodes!
A piece of old chain, welded to the metal hook I found in my metal scraps, that's on it, and I will show the easiest way that we used in the brigade.
We saw off the short piece of chain from the hook.
Here we get 11 units, our task will be to ensure that this piece of Bulgarian sawed in half. That is going to cut the 6th element, counting from either end.
To do this easy and secure chain of thing is very mobile and can easily bite a disc grinder, we need the stubs from the electrodes.
A little extra spice to our butts electrode grinder disk. the electrode rod is quite soft, so it does not take much labor and much time.
We fix our chain sharpened pins so as to be in a good tension, trying to drive at an angle, and then bends a little hammer. All of this is performed on every piece of wood with a flat surface.
Additionally, hammering rods into both the fifth link additional making stretch around the piece of chain-links We serve only forward from themselves and trying to drive the rods. There is still need to be taken into account which way the disc is rotated on your grinder, sparks under him or herself.
I drive sparks cuts for themselves, so look at the photos as clogged rods in the fifth links, close to the sixth link and the maximum advance of himself, well, what position will you cut face to the chain.
Gently sawed the 6th chain link, everything turned out as it should. Although if you experiment with a small grinder, and the circuit you've never sawed, it is better a little drained, better then dolman this link.
Although the circuit separation options are plenty, hamstring cutting, if a thin chain-tick bite or cut the chisel, and just burn through welding. I just showed one of the options.
Come to your channel tomorrow, and the day after tomorrow! Just Like, add the channel to your favorites, and SUBSCRIBE