Surely, this tool can be found in every home. In home use, pliers and pliers are more popular than other tools.
However, there is a catch. Most of the population confuse the concept of "pliers" and "pliers". Some people think it's the same tool.
And really, what's the difference? They look the same. Taking a deeper look, it turns out that each of these tools is designed for a specific job. Let's take a closer look at this issue.
What is the difference between the tools in question?
The main differences are:
- · GOST;
- · Manufacturing principle;
- · Functions performed.
For a person who is uninitiated in the intricacies of a working tool, it is difficult to tell the difference between pliers and pliers. They look the same, each tool has two handles.
In addition, there is virtually no difference between the combination pliers and pliers. The only thing is that the first ones have an edge with which you can bite through hard wires.
I would also like to note that carbon steel is used in the manufacture of pliers. The bottom line is that a given tool must withstand heavy compression loads.
If you look closely, you can see that the tools in question have different shapes. Each of them is designed to perform specific jobs.
What are the pliers
- ·Thin-nosed - have elongated lips;
- ·Platypuses - are distinguished by curved lips;
- ·Round nose pliers you can bend the wire in a curly way;
- Side cutters can bite the wiring, they only have a cutting edge and no clamping surfaces.
- Pliers, shown in the picture below, are suitable for working with small parts or wires.
The material for making such tools is hardened steel.
Pliers are a tool with a wide range of functions. They are designed for strength work. From the French language the word "pliers" is translated "rod clamp".
This tool is not suitable for assembling small parts. He has combined lips. There are recesses for gripping cylindrical parts (nails, rods, screws, thick wire).
The design also includes serrated clamping surfaces. Thanks to this, the compression force is significantly increased. Pliers are suitable for gripping parts, but there is a risk of damaging them. It is best to work with pliers during pre-processing.
Pliers can easily be confused with combination pliers as they also have an oval notch. However, the latter are also equipped with a cutting edge, with which you can separate fasteners and wires. In addition, sometimes there is an additional notch near the hinge for nibbling.
I think that after reading the article, no one will have any doubts that pliers and pliers are two fundamentally different tools that are suitable for different types of work.
Thank you for reading the article to the end! Please rate this article 👍 and subscribe to the channel.