An angle grinder is usually used for cutting metal. It is also used to grind metal materials. In hardware stores, you can often stumble upon special discs designed for cutting wood. They are suitable for plywood and thin boards.
When you cut wood with a grinder, you are at great risk, because at any moment the circle can jam. Also note that when sawing wood, an uneven edge remains. For these purposes better use jigsaw. I want to tell you which blade is best for cutting wood with a grinder. I will also share how to use this tool correctly.
So can you use a grinder to cut wood?
I must say right away that the best option for cutting wood is a hacksaw. Materials made of wood (we are talking about boards and plywood) can be cut with a grinder. But there are certain nuances here, which will be discussed further. Naturally, we must not forget about safety precautions. Everything in order.
For cutting wood, I recommend that you use the wood blade shown above. It has special teeth for a wide cut, so that the grinder disc will not jam. As a result, the risk of the tool being pulled out of the hand is minimized.
Safety when cutting wood
If you are going to make thin slats from the board or cut the plywood with a grinder, do not forget the following rules:
- Use a special blade that is suitable for cutting wood. It is strictly forbidden to take a circle on metal.
- Hold the instrument firmly and confidently in your hands. Find the most comfortable position. Do not saw wood materials lying directly on the ground. Place them on a suitable surface so that there is space below.
- If you need to cut a tree directly, do not take a grinder for this purpose. As a rule, the branches are damp, which makes it difficult for the disc to move. It is possible that the disc will jam and the instrument will be ripped out of your hands. It is very life threatening!
- If you have to saw wood, it is advisable to take a small grinder. It is much easier to hold a tool with a 125 mm disc than a 230 mm disc.
- Sawing the workpiece, you need to press it tightly with your foot or fix it well with a vise.
Your movements during work should be neat, unhurried and confident. Make sure that the circle is not jammed. Sometimes acrid smoke is generated when sawing plywood or planks. It is recommended to work in a well ventilated and ventilated area.
Remember, even if you installed a special circle for wood on the grinder, this will not turn it into a jigsaw. This option is suitable for trimming or unraveling the board. Do not forget that improper use of the tool can lead to dire consequences. Never neglect safety precautions. Your life can depend on it!
Thank you for reading the article to the end! I would be overly happy with your like š andsubscribing to the channel.