If you have a desire to shave with one razor cassette for a very long time without buying a new one, now I will tell you how to sharpen it after it dulls.
This is a very good saving, because the prices for "Gillette" shaving cassettes, to put it mildly, bite.
A set of two additional cassettes costs about 780-920 rubles, which is quite expensive, given the fact that with daily shaving, it lasts for a couple of weeks.
Kasar a month only for razor cassettes, that's cool!
Therefore, I will tell you how to give a shaving cassette a second, third, fourth, and so on, life!
To sharpen the razor cassette, we will use denim material.
We will also need a bar, quite for this case, a bushing from aluminum foil can also serve as a bar.
And accordingly the razor, the cassette of which we will try to sharpen.
Take the aluminum sleeve and insert it into the jeans leg. This is necessary so that only the blades are sharpened on the jeans, and the sides of the cassette are not captured.
It is worth paying attention to the fact that jeans must be turned inside out.
The inside of the denim is rougher than the front, and it will be easier and faster for us to sharpen the blade.
All preparatory activities have been completed. Let's start sharpening.
We take a machine with a cassette that we need to sharpen, and we pass it along the sleeve in jeans with a movement from ourselves.
Thus, you need to repeat this movement 50-70 times.
Then we do the same movements, only on the other side of the jeans. That is, you just have the machine in your hand, you move away from you, with a slight pressure on the jeans, in the place where the sleeve from the aluminum foil is inserted.
After doing a certain number of repetitions, which I wrote about above, try the razor sharpness, and you understand that it has become like new.
That is, you will not need to run to the store and spend the hard-earned money to buy a new shaving cassette.
The razor, after these procedures, gains shine and sharpness. That's all. Save!