The electrician explained why he installs a master switch in many private houses?

  • Dec 11, 2020
click fraud protection

Good afternoon, dear guests and subscribers of the "Build for Myself" channel

I did all the electrics in the house myself and, on the advice of an electrician, installed a Master Off switch in the house at the entrance to the electrical panel. When I start communicating with friends or work colleagues, many first hear that there is such a term as a master switch. Let's see what kind of beast it is!

Imagine that you have a large apartment or two or more storey buildings. You are in a hurry going to work or visiting, as a taxi is already waiting on the doorstep, you close the door and then the thought comes to you: "my, I forgot to turn off the light in the bedroom or forgot to turn off the iron."

Then you open the door, take off your shoes and run through all the rooms to check what and where you forgot to turn off.

You probably already guessed that the master switch allows you to de-energize the entire house or the entire apartment from one button while in the corridor, and in most cases it is done as follows:
instagram viewer
connect through the switch all electrical points with the exception of the necessary outlets: refrigerator, heating boiler and security equipment (alarm, video surveillance).

Done! Now, when you leave the house, you just need to click on the switch and get the bad thoughts out of your head. Agree that it is very convenient!

If it's not too late to make this switch in your house, do it, you won't regret it.

Now, in more detail...

This is one of the attributes of a smart home system, but it is quite possible to make it separately if there is none.

The switch is a contactor, which can be either single or three-phase. A contactor is a device that disconnects the load upon a signal and can easily be installed in your electrical panel.

Contactors

Many leading manufacturers have similar equipment, but not all have on-board controls. The best choice would be to purchase a contactor with a key, it is a little more convenient, but overpay 400-500 rubles more.

When choosing a device, you need to take the rated operating current as a basis and be sure to know which of the electrical appliances will be on this branch.

We calculated the power and selected the contactor. Everything!

It remains to choose a manufacturer. Prices are very different, you can buy for 800, and you can for 5000 rubles. I advise the golden mean. For 2 500 rubles. you can choose a reliable model!

Of course, you can also use a conventional switch, but only for the lighting group, otherwise, with a heavy load, the contacts the switch can burn out, because in the on position the entire load current will flow through it, and there will be TVs, kettles, microwave ovens And so on. It is unacceptable.

Such an amazing thing master switch or if in a fashionable way - Master OFF.

I hope you enjoyed the article. Thank you for your support and attention!

The article is in no way an advertisement. I'm just describing a really handy feature that makes life easier.

What fruit trees and shrubs are not afraid of high groundwater levels?

Eternal wooden roof as an alternative to modern materials (Photo of roofs after 300 years)

The professional explained what kind of timber frame will stand without processing for more than 100 years.