Condensation on pipes is very common. Most often, numerous drops of water are collected precisely on metal pipes. Subsequently, because of them, whole puddles can appear in the room, which becomes already a real problem. Even worse, the constant dampness in the premises creates numerous foci of mold growth.
Causes of condensation
Condensation on pipes can occur for one or more reasons. These include: leakage from the neighbors on top, poor-quality pipe insulation, breakdown of plumbing, poor ventilation, ill-conceived wiring configuration, worn out fittings. Also, the reasons may be accidents in the entire building or defects made during construction.
Also, the formation of condensation is greatly influenced by "insurmountable reasons", including geographical features of the area, temperature drops, as well as external weather and general climatic terrain conditions.
Nevertheless, any problem can (and should) be identified and solved.
Methods for dealing with condensate on pipes
In the vast majority of cases, you can solve condensate problems on your own. As a last resort, you can always resort to the help of specialists. First of all, it is necessary to pay attention to the thermal insulation of pipes and ventilation of the room.
1. Thermal insulation device
Very often, condensation forms for the most commonplace reason - temperature differences. To eliminate such a problem, it is necessary to insulate the risers through which cold water flows. The most budgetary option for thermal insulation is the use of vapor-tight foamed polyethylene (energy flex). You can find one in the form of soft tubes of different diameters in any hardware store. It is very important not to be mistaken with the size.
More expensive, but it would be much better to use a special heat-insulating paint, which is applied in 4-5 layers. Each new layer is applied only after the previous one has completely dried. It is also important to provide good ventilation during work.
2. Ventilation device
Bathrooms and toilets in apartment buildings are linked to a central ventilation system that has been designed to last for many years from the outset. However, over time (and without proper care), the effectiveness of such a ventilation system decreases. Ventilation cleaning is carried out only with the help of specially trained craftsmen. However, you can do something yourself if an initial check with a burning match confirms that there are problems with the system.
READ ALSO: 5 practical tips to get the most out of your screwdriver
First, you can inspect the ventilation for blockages, dust and cobwebs. All this will need to be removed. Secondly, remove and wash well the grate from dust, dirt and grease. It makes sense to purchase and install a special fan to provide forced air exchange.
3. Repair of communications and installation of steam traps
Last but not least on the list is the check of plumbing communications for defects and damage. As a rule, damage of this kind can be easily identified already during a banal visual inspection. All of them must be fixed by yourself or with the help of a professional plumber.
Finally, you can install special devices - steam traps, which will remove excess moisture on their own. They are placed in places where water droplets appear most often.
>>>>Ideas for life | NOVATE.RU<<<
Continuing the topic, read about 15 ways to use cornstarch for more than just cooking and not only.
A source: https://novate.ru/blogs/240919/51852/