Windshield wiper stripes: how to fix the problem quickly and cost-effectively

  • Dec 14, 2020
click fraud protection
Windshield wiper stripes: how to fix the problem quickly and cost-effectively
Windshield wiper stripes: how to fix the problem quickly and cost-effectively

Quite a lot of motorists in our time are faced with such a common problem as the problematic functioning of the windshield washing system. Because of this, wipers leave annoying streaks and streaks. As a result, the review may become even worse than before trying to wash the glass. Many in such a situation immediately run to change the cleaning brushes, but this approach often does not give the desired result.

Most likely the problem is not with the brushes. | Photo: drive2.ru
Most likely the problem is not with the brushes. | Photo: drive2.ru

The essence of the problem boils down to the fact that in fact, in most cases, stains on the glass remain not at all due to wear and tear on the wiper blades, but because they are incorrectly fixed. And this, in turn, means that changing the rubber bands themselves is a thankless and even empty business. To solve a problem of this kind, it is necessary to approach the solution from a fundamentally different angle.

The problem should be resolved promptly. | Photo: lada-xray2.ru.
instagram viewer

Recall that the wiper blades are pressed against the car glass using a special spring, which closes with a special metal body to protect it from external influences. Despite the presence of a shield, over time, the spring becomes unusable, ceases to provide the proper force due to the fact that it is corny stretching. Accordingly, without the necessary effort, the correct cleaning of the windshield is out of the question.

READ ALSO:Why do some motorists come to mind to insert tennis balls into springs

This is where the problems begin. | Photo: drive2.ru.

Important: many motorists in the winter when leaving the car are accustomed to raising the wiper blades. This helps protect the wipers from icing, but at the same time leads to accelerated wear of the spring.

>>>>Ideas for life | NOVATE.RU<<<

To fix the problem - cut or replace with a new spring. ¦ Photo: drive2.ru.

In order to solve the problem, you must first remove the wiper arms. A specialized key will help in this matter. It will greatly facilitate the work. After that, the spring is removed. From it you will need to cut off the coil so that it becomes shorter, but at the same time increases its tension force. After that, it remains to put the spring in place, and the wipers will become like new.

Note: Of course, you can do better and just buy and install a completely new spring. Do you want to know even more interesting things? Then read about funny cars of the last century that make you smile today in our difficult time.
A source:
https://novate.ru/blogs/211119/52487/