From time to time in the economy there is a need to cut off a piece of the bolt. Make it not so easy as it might seem at first glance. Anyway, if you do not know about the secret to trimming hardware used by experienced craftsmen. In fact, everything can be done quickly and without hassle.
Imagine a situation: we have a very long bolt, which urgently need to be cut. For many owners so simple at first glance, the task will be a real challenge. Really, to circumcise bolt quality and at the same time quickly is not so easy. Anyway, if you do not know a time of experienced craftsmen, for the implementation of which will need two nuts (must be suitable to crop the bolt), a marker, a screwdriver and of course hacksaw.
So the first thing to note is where we cut the bolt using a marker or pen. After that cheat the nut flush with the marked line. When this is done, we take the second nut and use it to tight Lock the first. Next, we take our bolt and insert it into the socket instead of screwdriver bits.
Left nothing at all - armed with a hacksaw, puts her to the edge of the nuts in the place where you want to carry out pruning. Firmly putting a tool and turn screwdriver. Just a couple of seconds and the bolt will be sawn into two parts. Minimum effort, maximum efficiency.
Note: You may have to clean up irregularities and correct thread.
READ ALSO: How to check the quality of the ball valve, choosing it on the market or in the shop
>>>>Ideas for life | NOVATE.RU<<<<
I would like to learn even more interesting?
Then read about 7 life hacking, how to make the home more comfortable, using what is at hand in home.
A source: https://novate.ru/blogs/210819/51467/