Laying tiles is far from the easiest thing that can take many hours, and in some cases even days. An experienced craftsman and owner always cares not only for the quality of the work done, but also for the speed of completing the task. That is why, when working with tiles, it is worth spending a little time creating the simplest device that will speed up the process almost twice.
Build process
So, to make a fixture for laying tiles, you need to prepare a couple of rectangular blocks of wood and a sheet of chipboard. The bars should be cut into 4 equal pieces (about 30 cm each). This can be done, including with an ordinary hacksaw. When this is done, the pieces are attached to the chipboard board.
It is best to do this with self-tapping screws. For this, it is also recommended to drill 2/3 of the fixing holes in the bars. The diameter of the hole must match the diameter of the head of the hardware.
READ ALSO:A simple "old-fashioned" way to catch mice in the house
Now we put one tile on a chipboard sheet, and on the sides of it we put two bars. You need to make sure the tiles are tight enough but still move. Putting the structure together. It is very important to ensure that a notched trowel can be installed to apply the adhesive between the slats. That is, in fact, the whole assembly procedure.
>>>>Ideas for life | NOVATE.RU<<<
How to use
Using the tool is not difficult at all. Having assembled the entire structure, it is necessary to apply glue to the fixture. After that, a tile is inserted into the tool and pushed forward under the glue. As a result, it will come out, on the other hand, from the spatula with glue applied along the entire length. The main thing that this tool is good for is that the glue is applied to the tile as evenly as possible.
Continuing the topic, read about how to decorate a bathroom to clean less: 8 tips and 4 life hacks and not only.
A source: https://novate.ru/blogs/021019/51939/