5 ways how to precisely cut glass bottle with improvised means

  • Dec 24, 2019
click fraud protection

(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU

 How to cut a glass bottle.
How to cut a glass bottle.

Sometimes urgent need to cut glass bottle appears in everyday life. If the home is no special equipment, it is possible to make the cut and the materials at hand, and no worse than in a factory machine. Of course, it will have to roll up our sleeves and a little sweat.

1. Candle

Gray - Let cool.
Gray - Let cool.

Well heated glass over a candle on the planned cutting line. Then cooled by ice bottle and do light tapping. If done correctly, there will be a smooth cleavage of the line.

2. Glass cutter and water

And you can build a glass cutter.
And you can build a glass cutter.

The most obvious way - to use a glass cutter. You can do this on their own, however, it is better to do a factory model. When implementing this method, you must consider the following: The bottle should be securely locked, but free to rotate. Now we make the cut line.

Shared device principle is actually quite simple.
Shared device principle is actually quite simple.

By cutting line should shed first hot and then cold water at once with ice. By reducing the glass should break away.

instagram viewer

3. Friction

Good old friction force and help out here.
Good old friction force and help out here.

You can use the force of friction. For this purpose, the bottle should be put on the two plastic ties as restraints. Between twine wound in three turns. After that, it begins to drag the rope, holding it loose ends. After 2-3 minutes of hard work will only put a bottle of cold water and start doing light tapping on the section line.

4. Installing a filament yarn

The most dangerous and exotic way.
The most dangerous and exotic way.

For this method of cutting glass will need a transformer, wires which are closed by means of thick wire. After that, the transformer is connected to the network. When the wire is heated.
Will only attach it to the bottle. The latter is necessary to rotate along the cutting line. It is important to ensure that the bottle was warm uniform. It should also not forget about safety.

5. burning rope

You can burn the rope.
You can burn the rope.

The method is implemented with the help of string and refined gasoline lighter. The rope must be wrapped around the bottle at least three times. This cut the twine should be soaked in gasoline so that it is completely soaked. Twine wound around the bottle ignited. After all the fuel will burn, will drop the bottle in cold water.

Continuing the theme 12 receptions for cleaning the house for those who are a bit obsessed with cleanliness and not only.

(!)Subscribe to our channel at Zen >>IDEAS FOR LIFE| NOVATE.RU
A source:
https://novate.ru/blogs/161118/48438/