And a spare tire is not needed: how can you quickly fix a puncture of a tubeless tire on the road

  • Dec 14, 2020
click fraud protection
And a spare tire is not needed: how can you quickly fix a puncture of a tubeless tire on the road
And a spare tire is not needed: how can you quickly fix a puncture of a tubeless tire on the road

A spare wheel should be in every car in case a puncture occurs. Replacing a broken wheel so that you can drive to the nearest service station is a skill that every motorist must possess. However, these days it is possible to avoid the hassle of a key and jack when it comes to tubeless tires. This is as easy as shelling pears if you have a special kit at hand.

The situation is unpleasant. ya.ru.
The situation is unpleasant. ya.ru.

In order to extricate yourself from such a situation gracefully and without unnecessary complications, it is enough to have a tubeless tire repair kit in your trunk (you still need to carry a spare tire!). You can find such sets on the windows of car stores. They cost about 100 rubles and allow you to quickly repair a puncture in a tire so that you can get to the nearest auto repair shop without changing a wheel. It is important to emphasize that this solution is temporary.

it will need such a set. bikepost.ru.
instagram viewer

Emergency repairs are carried out in several stages. The first step is to find the puncture site. With a high degree of probability, the culprit of the accident will remain sitting in the tire. It must be removed first with a suitable tool, for example, pliers. After that, the area around the puncture should be thoroughly cleaned.

READ ALSO: 5 buttons in the car that should be used with extreme care

Great stuff. 4x4ru.ru.

Next, you need to check the tire pressure. If, after a puncture, it turned out to be lowered to zero, then the pressure will have to be raised so that it is about 0.5-1 atmosphere. This, incidentally, is described in the description of each repair kit for tubeless tires. Then, the puncture site must be cleaned. To do this, keep a rasp in the car.

>>>>Ideas for life | NOVATE.RU<<<<

Seriously make life easier. drive2.com.

When the hole is ready for repair, one of the harnesses is removed from the kit. It is inserted into a special awl with a hole from the kit. After that, a tube of glue is opened. The composition is applied in a thin and uniform layer over the entire part of the tourniquet. Immediately after this, the awl together with the cord is inserted into the puncture site 2/3 of the length and immediately removed with a sharp upward movement.

It remains only to cut off the protruding fragment of the tourniquet with a knife.

If you want to know even more interesting things, then you should read about
7 problems with the carabout which the condition of the tires can tell.
A source:
https://novate.ru/blogs/120520/54491/