For this homemade product, you need about three meters of pipe with a diameter of 20 mm. They can be purchased at any hardware store. And fittings (plumbing parts) of the same diameter.
We need three plane corners, if desired, you can only do with tees. AND bypass pipes. They are used for forced crossing of the water supply system.
You will also need two simple corners by ninety degrees.
Let's start welding. If you don't have a soldering device, it doesn't matter. You can find them in stores for only 700 rubles. Not so big 💰 money.
It should look like this:
Next, we collect the rest of the details.
And the whole kit looks like this:
This homemade product frees your hands from unnecessary stress and allows you to enjoy nature while drinking tea with apricot pie.
In the end, this is what I got: Fishing rod stands. One for the flywheel. The second is for the feeder.
I secured them to the pier with self-tapping screws. The rods are easy and simple to install in the holders, and the construction itself is quite robust.
Dear friend, like this article with a useful homemade product! It is easy for you to press the button, but I am very pleased. Thank you.