Hello, dear readers of the Master Sergeich channel!
Some time ago I wrote an article about how I did creative organizer from tin can and keyboard, more precisely from the keys. Many readers liked this idea and asked to see something else from the old keyboard.
And just today I will show you what kind of night light I made from an old, broken keyboard and some other materials. To be more precise, from some inner part of the keyboard.
For making, I needed:
· Old keyboard;
· Cream jar;
· Stationery knife, ruler, scissors;
· A pair of small sockets and 2 LED bulbs;
· The wire;
· Hot glue;
· Insulating tape;
Dear lovers to buy everything and make someone else's work, please pass by, do not waste your most precious time on this (not necessary for you) craft. Thank you!
Step 1.
I disassembled the keyboard and took out 2 films from it. So they will be needed, the rest can be removed.
Step 2.
I cut off the excess parts of the films.
Step 3.
In a jar of cream I drilled a small hole for the wire.
Step 4.
I glued 2 sockets for LED bulbs inside the jar and connected the wires.
Step 5.
I inserted a wire into the hole in the can, connected it to the cartridges and insulated it behind. The wire was tied to the jar with hot glue.
Step 6.
In the film I made a slot for the wire. I applied hot glue to the inside of the jar, rolled the film into a tube and glued it to the jar.
Step 7.
I rolled up the second film and put it inside too.
Step 8.
I inserted LED bulbs into sockets. I covered the lamp with the top cover.
Here's a lamp I got.
If you wish, you can paint the jar in any color, it will look even cooler.
LED bulbs, so they practically do not heat up. These bulbs are powered from the mains, no power supply is needed. Such a lamp is as safe as conventional lamps.
Unfortunately, the photo does not convey how cool it shines in the dark.
Check out what else I have done from the keyboard:
Organizer from an old keyboard and a tin can
Friends, if you liked the idea, please like it, share with your friends and subscribe to my channel.