Magic corner for the kitchen (36 photos): do-it-yourself video instructions for installation, photo and price

Today, housewives come to the aid of a wide variety of devices, devices and devices. And what can we say about kitchen utensils... Eyes run up! And I want to buy this, and that, and this is also in the bargain. The question arises - where to store all this good.

Considering the small size of our kitchens, this problem is practically insoluble. And again high technologies come to the rescue. The invention of the magic corner for the kitchen makes it possible to successfully use the unused space of furniture. And also, store everything you need without cluttering the kitchen.

general information

Forms

Before the advent of this invention, the problem of using corner cabinets was solved by one of the methods shown in the photo.

In practice, there are four possible forms of arrangement of the corner kitchen module:

1. Trapezoidal

1. Folding front

1. Radius

1. Euroangle

Of course, these models will not go out of use soon. This is due to the relatively low cost of their manufacture, ease of installation, and ease of replacement.

Despite this, the modern magic corner in the kitchen is gradually pushing back the traditional fixtures. After all, he has a number of advantages.

Advantages

Objective

• In the manufacture of the device, steel wire is used, which ensures its durability and strength;
• The wire has a fourfold galvanic coating. It is also intended to increase the product's lifespan;
• The ability of baskets to withstand high loads. For internal - up to 15 kg., For external - up to 7 kg.;
• The presence of closers, which allows for a smooth and quiet sliding of the slide;
• The presence of a special latch that prevents the collision of two baskets;
• Possibility to install both right-hand and left-hand drive units.

Subjective

• Ease of use, due to the ability to access the farthest corners kitchen cabinet;
• The ability to place a large number of various items in special cells of baskets;
• Ease of installation. You can do it yourself;
• Substantial space savings;
• Relatively low price.

Magic corner, what is it

The installation is a wire steel basket.

By their purpose, they are divided into:

1. Folding. Consist of two baskets. One of them is fixed on the front door, and the second moves in the middle of the kitchen block.

Depending on how far the inner baskets are pulled out, it is customary to distinguish the following types of devices:

• with partial extension.

The mesh in the cabinet is located in the back. When the door is opened, the hinged nets "move out" outside the cabinet. And the inner nets are "matched" to the doorway.

Thus, free access to everything that is stored in this kitchen cabinet.

• with full extension.

This design is even more open. Since the inner baskets also "go out" outside the cabinet.

1. Simple. They are attached directly to the front door and "leave" together with it. At the same time making it easier to access things.

• vertical

• circular.

The main purpose of the design is to improve performance kitchen modules.

1. Combined. Are a good combination of the first two

Optimizing your kitchen space with a magic corner

Installation

Here are the instructions for installing the left-hand partially extendable corner.

Note! The right-side corner is installed in a mirror image.

Installation takes place in several stages.

1. Position the support block against the left inner side wall of the kitchen unit.

1. Position the locking lever against the front edge.

1. Place the locking lever against the side wall.

Helpful Hint: It is better to install the stopper arm stop until it clicks. This way, you can be sure that it is securely fastened.

1. Install the rear sliding frame.

Legend

• Rear frame;
• Guide slide;
• Locking lever;
• Ball mechanism;
• Retractable frame;
• Front support.

1. Install the guide slide.

1. Install the sliding frame.

For this:

• extend the frame to its full length;
• install the frame in the locking lever;
• align and place the frame in the guide rail;
• click the locking sleeve in the sliding frame.

1. Attach the front support to the panel and install in the pull-out frame.

Helpful Hint: Be careful with the front supports. Out of level, they can hinder its smooth operation. And also lead to rapid wear of the mechanism.

Video instructions for installing a magic corner in a kitchen cabinet are here:

Conclusion

Our brief excursion into the world of magical kitchen corners is over. We sincerely hope that the information provided here will help you make an informed choice and easy installation of this mechanism.

Gallery