Kitchen corners with a table (38 photos) and chairs, a set with sliding rectangular or round tables, do-it-yourself assembly: instructions, photo and video tutorials, price

Kitchen corners have been, are and will be, perhaps, one of the most popular kitchen furniture products. You can see many different models in stores: colors, shapes, materials - it's all different. Moreover, the products also differ in quality, since unscrupulous manufacturers want only one thing - to sell their goods.

It would seem a simple product, but how much it transforms the kitchen, makes it more comfortable and cozy

How to choose the right one

If you set out to purchase a kitchenette with a table and chairs, you need to know the following aspects:

• When checking the quality of furniture, be sure to pay attention to the end part of the details. If it is laminated chipboard, then there will be an edge, which, with poor-quality processing, can be felt to the touch and in some places may move away. It is impossible to eliminate such a marriage at home, so it is better to leave the corner in the store.
instagram viewer
• When buying a corner in the kitchen with a table, be sure to inspect the attachment points. In most cases, confirmations (euro screws) are used, you can also find metal corners with self-tapping screws. In any case, the fasteners must be free of obvious traces of rust, knocked down edges and securely tightened.
• It will not be superfluous to inspect the places where the fabric is attached. It doesn't matter what is used to fix the soft part of the corner, the main thing is that the fastening does not allow the fabric to weaken or break through.
• If you are looking at kitchen corners with a round table, then, in this case, the edge of the table plays an important role, how smooth it is and how it is processed. If it is chipboard, then check the edge by touch, if it is natural wood, then inspect the quality of processing and coating. Low-quality products may show traces of non-staining, protruding varnish, roughness and abrasion. In the corners of conscientious manufacturers, such defects are considered a marriage, and they are not allowed on sale.
• Another point worth paying attention to is the lower part of the struts. Special plastic thrust bearings should be attached to it to prevent the product from contacting the floor. If they are not there, then, for example, laminate racks will become unusable after 2-3 washes of the floor, in other words, they will swell. And it doesn't matter at all that you buy tables and chairs or corners - the products must be of the highest class.

Landmark for the interior

Moreover, the corner with the table in the kitchen should not only be of high quality, but also ideally fit into the interior of the room. Here are some guidelines on how to make the product look in the kitchen and not overload the environment.

• The first step is to determine the place for the furniture. It is best to position the corner so that there is a wide passage to the headset, the dimensions of the product should not exceed half of the free space in the kitchen. But at the same time it is undesirable to install it in front of the window, the sunlight will dazzle during meals.
• The color scheme of the corner should be combined with the rest of the kitchen items. For example, if the facades of the headset have a bright color, then it is worth adding the same shades on the soft corner. The easiest way to do this is with upholstery fabric.

The base of the corner is combined with the floor covering, and the fabric matches the shade of the walls

• The kitchen corner with a round table to match the front door looks interesting. This method allows you to highlight the object against the background of walls and floors, which, as we know, cannot be matched to the color of the door leaves.
• The shape of the corner should not be at odds with the kitchen interior. For example, if you decide to smooth all the lines, then a rectangular or square table is useless. The same applies to the corner posts, they should have smooth transitions from plane to plane.
• It is ridiculous to use a chipboard product if the kitchen unit is made of natural wood. Outwardly, such materials do not combine, it is better to look for something more suitable, for example, opt for plastic or film (find out also, how to decorate kitchen furniture).

The main disadvantage of a corner with a square table is that it takes up a lot of space, for a small kitchen this is critical

Note! When purchasing kitchen corners without a table, you should decide in advance on what the future table will be like. If you decide to purchase a glass product, it is better to choose a lighter corner, without a solid back and a massive bottom.

Homemade kitchen furniture

To save money, you can not only choose more practical products, but also create "masterpieces" yourself. Do not think that it is difficult and it will take a lot of effort from you, all you need to do is read the information below.

We have divided the section into two parts, in one we will consider how to make a kitchenette without a table. After that, let's talk separately about the tables themselves (find out also about what furniture is suitable for the kitchen in Khrushchev).

Soft corner sofa for kitchen

Initially you need to purchase materials:

• Since we do everything with our own hands, it is best to use chipboard. Firstly, it is easy to purchase from a furniture organization, and secondly, it is easy to process. It is best to order finished products, sawn, framed and in size. The price of such a service is slightly higher, but the workflow itself becomes easier.
• We also need foam rubber and fabric for upholstery. Faux suede is considered the most reliable.
• Fasteners: Euro screws, self-tapping screws, metal corners, nails (staples).

As for the tools:

• Drill.
• Screwdriver.
• A hammer or furniture stapler.

And here is the instruction itself on how to make a kitchen corner:

• The first step is the marking: according to your details, the stiffeners and seats should be noted. It is best to place the stiffness in the center of the strut so that the structure is much more stable and not loose in the future.
• Details under the back are marked in the edge with an offset of 8 mm.

This is how the Euro screw mount looks like

Note! It may be that your chipboard will not be 16 m thick, but 18 or 20 mm, respectively, and the drilling center will be 9 or 10 mm.

• After marking and drilling, it is necessary to cover the seats and back with material. To do this, foam rubber is initially fixed with glue or double-sided tape on the surface of the chipboard.
• Then the fabric is stretched and punched with staples or nails from the back.

This can be an overlay piece that will be fixed over the main seat

• Now you can put the whole structure together.

As you can see, making a corner in the kitchen without a table does not require much effort and time-consuming, the main thing is the desire to tinker.

How to make a table

Now let's look at a quick guide on how to make a rectangular kitchen table.

• For the countertop, the same chipboard is suitable, only its surface must be covered with plastic. You can buy such a base at a hardware store.
• We use either purchased metal supports or laminated parts as legs.

Note! Ready-made products can be used as a countertop; they will be slightly more expensive, but have a more attractive appearance.

Fastening is carried out in two ways:

• Using metal corners and self-tapping screws.

Use stainless self-tapping screws for wooden blocks

• With clamps - only for metal legs.

Look at the photo how it looks.

In this case, metal pipes-legs and a moisture-resistant chipboard sheet were used

Which is better

When choosing a table with chairs or a kitchen corner, first of all, ask yourself - which is more convenient for you. After all, the most important thing is to feel comfortable in the room in which you spend your time. For example, many people prefer chairs with a sliding table; this option, at least, has the ability to free up space in the room. While the corners no longer move and do not understand (read also about how to choose and place kitchen equipment).

Sliding mechanism saves on used space

Although the main aspect when choosing is still the cost of the product.

Conclusion

The above information will help you not only with the choice of furniture items, but also make your own tables and kitchen corners for yourself and your loved ones. In any case, if something is not clear to you, then you can watch the video at the end of the article - additional visual perception.

Gallery