How to hide pipes in the kitchen: close, remove, sew up, hide, mask, decorate with your own hands, instructions, photos, price and video tutorials

Let's start our article by determining which pipes are located in the kitchen.

• Gas;
• Cold water tap;
• Hot water tap;
• Sewer;
• Heating.

As you can see, there are a lot of pipes for such a small room. Therefore, the question of how to close the pipes in the kitchen or how to hide them is relevant.

Types of methods for decorating pipes

To begin with, there are several basic ways of dealing with pipes that carry water. Some of the methods have nothing to do with the gas pipe. It's just that these methods of concealment do not allow them to be applied in accordance with the current norms and rules for the operation of a domestic gas pipeline.

Hidden wiring

This is one of the most common methods currently used. For this, strobes are made from the riser to the sink along the wall or floor.

This process is laborious, requiring a good puncher and skills to use it. It is in the grooves that pipes (water and sewer) are laid, where they are bricked up with plaster or putty mortar.

There are three basic rules to be followed closely:

1. Water pipes must be installed over a sewer.
2. The hot water pipe should always be located to the right of the cold water pipe if they are mounted in the same horizontal plane.
3. The sewer pipe is laid with a slight slope (gravity sewage) towards the riser. The slope angle for pipes with a diameter of 32-50 millimeters is two millimeters per one running meter of the length of the sewer pipeline. And three millimeters if pipes with a diameter of 80-100 millimeters are installed.

Plasterboard box

And now to the question of how to close the pipes in the kitchen, if there is no way to conduct hidden wiring. The best option is to make a box of plasterboard sheets. In principle, you can use other sheet material (chipboard, plywood, plastic, etc.), but it is easier to work with drywall, and it is cheaper.

For the construction of a horizontal box, metal profiles and drywall itself are required. Usually the pipes run near the wall, so the frame is attached to the wall and floor, which creates a fairly rigid and reliable structure.

For this, a guide profile is horizontally installed and fastened with self-tapping screws on the wall ten centimeters from above the pipes on the wall. Its length is determined by the length of the pipes.

Exactly the same profile of the same length at the same distance from the pipes is installed and fixed to the floor. Now small sections of the profile are cut, the size of which is determined by the distance from the wall to the floor profile. They are attached to a profile that is mounted on the wall.

More segments are cut with dimensions equal to the distance from the floor to the wall profile. They are attached to a metal floor rail.

The intersection of vertical and horizontal segments is the location of another profile that will complete the frame structure of the box. It is attached to the segments with self-tapping screws.

Now it remains to cut the plasterboard strips exactly along the edges of the frame and fix them at their destination. The next stage is the finishing of the entire structure. This is how a pipe box is constructed in the kitchen.

Hood boxes in the kitchen - see here.

Cabinets

This is probably the easiest option. To do this, you need to purchase a kitchen set with floor cabinets that do not have a back wall.

If you cannot find ready-made furniture of this type, then you can assemble cabinets with your own hands. Fortunately, this is not a problem today.

Riser in the kitchen

Very rare, but risers in the kitchen are found. How can you hide them? Of course, it will not work to lay them hidden in the wall, so this method is swept away immediately.

The other two remain.

• In the first case, that is, the use of a plasterboard box, you will have to arrange a metal or wooden frame. Then carry out the plating and decoration. There is an important point in this method that concerns decoration. After all, whatever you say, the box will be the visible part (element).

Therefore, you will have to think carefully about the design itself. In principle, the box is a kind of continuation of the wall, so the design of the wall is transferred to this structure. If it is tiled with ceramic tiles, then the box cannot go anywhere.

• The second option is a furniture pencil case. If there is an acute question of how to hide a pipe in the kitchen, then this method will be the most popular. That is, at the place where the riser passes, a furniture case is installed in the entire height of the room, which externally is a regular cabinet, but communication systems pass inside it. Here, a counter, shut-off valves, revisions and other devices and devices are installed, which are hidden from view by an ordinary furniture door.

How to hide a gas pipe

The question of how to decorate a pipe in the kitchen will come up to the gas main. Precisely to decorate.

It is forbidden to carry, brick up the wall, change the slope, etc. with gas. Only the permission received from the city's gas industry and the creation of the project will give you the opportunity to do something (and this is not a fact).

Therefore, you need to approach this issue with imagination. The first thing that comes to mind is the same pencil case or cabinets (wall and floor).

The furniture is simply installed in such a way that the gas pipe passes through it, remaining inside behind the doors. Simple, convenient, cheap.

The second way is full decoration. Here, the question of how to close the pipe in the kitchen is inappropriate.

There are plenty of decor options. Only limiting your imagination can somehow stop the choice of options.

For example, you can simply paint it white and apply black strokes, thereby making the trunk of a birch. And a few green leaves will give the theme a believable look. Can be painted with bronze or silver.

Note! Designers propose to fit the pipe into the overall design theme of the entire room.

If the rustic style was taken as the basis, the birch will be exactly in the theme. If a techno style was chosen, then the vertical of a metallic unpainted look will also fit into it exactly. And there are a huge number of such options corresponding to style directions.

Read also the article “How to hide a gas pipe in the kitchen - design options”.

Heating pipe

How to close the pipes in the kitchen leading to the heating radiator? This problem is no more complicated than the ones we talked about earlier in the article.

Practically the same methods are used here.

• Box made of various materials;
• Furniture (pencil case);
• Decorating;
• You can make a hidden layout.

And, as practice shows, it is decoration that is the easiest way. Do you know what designers offer?

It is necessary to clean the pipes to a metallic luster if they are made of metal, or paint them in a metallic color and hang rails on them. All ingenious is simple.

Very often radiators are covered with decorative grilles. It is possible to lengthen this structure and completely close the supply lines. Isn't it an option?

But the risers are best covered with furniture. You shouldn't build boxes, decorate them, think over the design.

The easiest option is to install a pencil case. But for those who use the Baroque style in the kitchen, designers recommend using stucco (the price of the method is slightly more expensive).

Conclusion on the topic

As you can see, when answering the question of how to mask pipes in the kitchen, you can use many options. Some of them are complex and expensive, some are simpler and cheaper.

But everyone will always find what is right for us. Although, in this case, you should not look for some complicated options that will burden not only the kitchen space, but also your wallet.

The page of this site contains videos and photos that can be used as instructions for use. They will simply help you in choosing one or another option.

Gas pipe in the kitchen - see here.