How to integrate a dishwasher into a finished kitchen, where to put a dishwasher in a small kitchen, a good location in the interior, do-it-yourself installation: instructions, photo and video lessons, price

A few years ago, the dream of many women to have a dishwasher in the kitchen was unrealizable. Its price was unaffordable. But time has put everything in its place, and a family with an average income can afford this necessary household appliance today.

But bad luck, there is a device, there is a kitchen (meaning both the room and the headset), but there is no place for a typewriter. This is where the question arises, how to integrate a dishwasher into the kitchen? The question is not rhetorical, because it is connected with a purely technical process.

First, you need to find a place where the machine will be installed. This could be one of the floor-standing kitchen cabinets.

But, as practice shows, there is a difference between a typewriter and a typewriter, here we mean the dimensions of the device. Therefore, the size of the kitchen cabinet must be correlated with the size of the dishwasher, but at the same time take into account one very important nuance.

Important! The distance from the household appliance to the entrance to the sewage system should not exceed 1.5 meters. This is a condition of most manufacturers, who guarantee the efficient and long-term operation of the drain pump located inside the machine.

Read also advice on choosing built-in kitchen furniture.

Dishwasher installation steps

Like any technical process, especially associated with the installation of a household appliance, is divided into several main stages. And here the sequence of compliance is important exactly as prescribed by the instructions.

Preparing a place

The whole process starts with preparatory work. To do this, the cabinet you have chosen must be pulled out of the headset.

What do we have to do?

1. Unscrew the screws that hold the tabletop.
2. Unscrew the ties that hold the side walls with the walls of adjacent cabinets.
3. Now pull on the cabinet, which should come out easily (the most important thing is to make sure that the cabinet is not holding anything else).

We disassemble the closet

• Now you need to completely disassemble the extended cabinet, leave only the side walls with the doors screwed to them intact. You will have to say goodbye to the back wall forever.
• The same will have to be done with the base. But here it is necessary to leave only two side elements from it, on which the side walls with doors will subsequently be installed.
• After that, take a drill in your hands and, using a crown, drill holes in the side wall of the sink cabinet for conducting sewer hoses and cold water supply, as well as electrical wiring.
• Drill at the very edge of the wall so that the holes are incomplete, that is, without a wooden edging against the wall.

Read also a practical guide to the optimal arrangement of furniture in the kitchen.

Assembling a new (modernized) cabinet

The next stage is the installation of the base / plinth side elements, on which the side walls with doors are installed. Install each side panel separately and fix it immediately to the side walls of adjacent cabinets using metal ties. If everything is ready, then all that remains is to install the dishwasher at its destination.

Attention! Manufacturers recommend sticking a metallized protective film on the back of the countertop before installing the device. This is a simple necessity associated with opening the machine door, from which steam will escape. And the steam will quickly destroy both the countertop and the cabinet walls.

And one more thing - it is best to twist the adjustable legs of the machine so that the unit lowers to the end, that is, to the floor. Then you can insert the dishwasher into the prepared space.

In principle, the answer to the question of how to integrate a dishwasher into a finished kitchen with your own hands is practically given. There are still small nuances related to the connection.

Machine installation

Slide the device into the niche after pulling out the connecting hoses and the power cable. The latter are pushed into the holes made in the side walls. Now, using the adjustable feet, you need to set the machine in a horizontal plane. This is not difficult.

What's left?

1. Connect the cold water supply hose to the pre-prepared connection.
2. Connect the discharge hose to the drainage system.
3. Connect the power supply (this can be a regular outlet, but it is better to make a separate wiring directly to the distribution board).
4. Install and attach the base / plinth front panel.

Everything, on this the installation process can be considered complete. Complicated? Not really. For those who do not quite understand what it is about, you can watch the videos and photos posted on the page.

Useful Tips

And one more little piece of advice. Be sure to do a test run of the unit. There is no need to place the dishes inside, but you must put the detergent. It will simply unclog all dirty surfaces inside.

During test use, it is necessary to track whether the dishwasher is working properly. More specifically:

• How electronics works;
• Is water supplied in the right volume;
• Whether the water used is pumped out well;
• How heating occurs;
• Is there a filtering system that is responsible for the quality and efficiency of the dishwashing process?

Not all housewives use this household appliance correctly. And the thing is that they never read the instructions that come with the device.

Therefore, there are some useful tips for them.

• After one wash cycle, you must not immediately proceed to the next. Let the machine rest a little, at this time the door should be slightly open.
• Many models of dishwashers today are equipped with a water leakage prevention system. Regardless of whether yours has such a system or not, after each completed washing process, close the cold water tap.
• And be sure to shut off the power supply after use. - unplug or unplug the machine.

Kitchen interior with dishwasher

The dishwasher in the interior of the kitchen is a certain approach that takes into account some of the features of the household appliance itself.

Therefore, there are only three installation options:

1. Partially built-in device. In this case, only the panel of the appliance is visible, the rest of the front part is hidden behind the decorative facade of the kitchen set. By the way, manufacturers today began to offer cars with panels of different colors, which means that it became possible to choose it exactly to the color of the furniture.
2. Fully built-in dishwashers. They are completely closed by the front doors of the kitchen furniture.
3. Built-in models that do not need to be closed with doors or facades. They fit ergonomically into any interior, and are themselves a design element.

Surprisingly, it is the latest models that are very popular today. Because many housewives want to boast that they are the happy owners of such a prestigious household appliance.

And one more question that torments a large number of ordinary people today, where to put the dishwasher in a small kitchen? The question is serious.

Of course, the small size of some kitchens is a big problem for the arrangement of household appliances. What can you advise in this case?

There are few options, but they are. And the easiest option is to buy a desktop model.

It may seem to many that such babies will not cope with the responsibilities assigned to them. And you are greatly mistaken here.

Even the smallest model washes dishes perfectly, albeit in small quantities, but it is definitely suitable for a family of three. And if guests came? Nothing, the machine will cope with such a volume in two or three approaches.

Surprising little ones:

• firstly, they consume less energy;
• secondly, in terms of efficiency they are in no way inferior to their big brothers.

There is another dishwasher for a small kitchen - this is a narrow floor-standing model. If you compare it with the desktop, then there is a difference. It is more powerful, has a larger working volume.

But whether it is worth purchasing this particular option is a question, when answering which it is necessary to take into account some technical parameters of the unit.

Here are some examples of dishwasher sizes for a small kitchen. The most important indicator here is the width of the device.

The standard size is 60 centimeters. The narrow model is inferior in this regard - its width is only 45 centimeters, this is a decent size reduction.

For example, some manufacturers do not reduce the width, but the height. German companies are famous for this approach, which have proposed unique models, which are 45 centimeters high. For small kitchens, this is the best option.

Conclusion on the topic

Summing up all of the above, two conclusions can be drawn:

1. The dishwasher is one of the most demanded household appliances today. Therefore, manufacturers offer a huge range, in which you can choose an appliance for any kitchen.
2. The process of installing a dishwasher is so simple that any man who has the slightest degree of skill in working with plumbing and plumbing tools can handle it.

Read also about installing a built-in hood for the kitchen.