Refrigerator in the kitchen (35 photos) and other household appliances, photos, videos, DIY design instructions

The choice and arrangement of equipment for kitchen renovation is quite an important and responsible process. The fact is that the future design of the room will be formed around it, but at the same time beauty should not be a prerogative so as not to damage functionality. You should also take into account the fact that sometimes you have to deal with small rooms that do not exceed 6 or 8 square meters in area.
Therefore, many designers and craftsmen try to use such design solutions as a niche for a refrigerator in the kitchen or a built-in oven. Moreover, if the hob or oven can easily fit into the design of even a small room, then refrigeration devices are usually quite cumbersome and require a separate approach not only when choosing, but also installation.

Project

Almost any construction or renovation begins with the creation of a project. It is necessary in order not only to have an idea of ​​the appearance of the room, but also to plan the arrangement of furniture and equipment (see. article How to correctly arrange furniture in the kitchen: useful tips). At the same time, a standard kitchen project of 8 sq m with a refrigerator can have a lot of technological solutions for the placement of this device.

Niche

This type of project has a large number of its advantages and disadvantages:

• If the kitchen doesn't have its own niche, you have to do it yourself, which can take a lot of time and money.
• A niche will significantly save space.
• Even the most ordinary beige refrigerator in the interior of a kitchen with a niche will look amazing.
• When choosing such a project, it is necessary to resolve the issue of heat transfer from the radiator of the device and connection to the electrical network.

Advice! Such a project will suit those people in whose kitchen there is already a similar place or access to the balcony.

Built-in appliances

When creating a project where built-in appliances will be used, it is necessary to remember that such a solution will not in any way affect the saving of space, but on the contrary can reduce it. That is why the design of a 6 sq m kitchen with a refrigerator does not use such technical solutions. However, in large rooms, this allows you to hide a bulky unit, giving it an aesthetically pleasing appearance.

Advice! According to many designers and planners, this method is one of the most unpromising in relation to refrigeration technology.

Solutions from manufacturers

When deciding how to hide a refrigerator in the kitchen, many manufacturers of this device decided to go by the opposite. On the contrary, they put their technique on display, giving it intricate shapes, bright colors and even various patterns.

There are several areas in this area that must be considered when creating a project.

• The first solution is to give the device a vivid color, as close as possible to the interior. That is why, in this case, the design of the room should be planned based on the appearance of the refrigerator.
• When deciding how to hide the refrigerator in the kitchen, many resort to devices that have a matte surface. They do not shine in the sun, and when correctly positioned in the room, they become almost invisible.
• Some manufacturers divide their products into a freezer and a refrigerator. This solution allows you to install both devices in a convenient location, saving space. Often, an ordinary camera is placed directly in the room, and the freezer is taken out onto a balcony or loggia.
• If a large drawing or image is applied to the refrigerator for the kitchen, then it will become real decoration and the whole interior should be based around it, from tiles and wallpaper to furniture.

Advice! These technical solutions from manufacturers can be considered one of the most economical. They do not require large additional costs and work.

Removing the device to another room

One of the most common placement solutions is equipment transfer. Quite often, a refrigerator is placed at the entrance to the kitchen.

At the same time, various niches or dead zones are used, which are practically not used on a daily basis. However, this is not entirely convenient, since you have to constantly travel a certain distance to access the products, which can become quite significant in a day.

Technique quality

• Choosing a refrigerator, first of all, the buyer is interested in quality and reliability. At this time, Belarusian equipment or from the Korean company Samsung has proven itself well. These units have shown themselves well when working in domestic power grids, with their constant overloads or failures.
• At the same time, these manufacturers give a very good guarantee, which once again proves the reliability of the device and its practicality.
• The issue of price should be noted separately. The fact is that not always expensive equipment deserves attention. Imported manufacturers of expensive brands usually pay attention to design, various additional functions or how to disguise the device. At the same time, their equipment is designed to operate in stable power supply networks, which is often not suitable for domestic consumers.

Advice! When choosing a device, first of all, you should pay attention to its resistance to voltage surges and protection against short circuits.

Installation and installation rules

When installing refrigerators, it must be borne in mind that each household appliance has its own requirements for placement and power supply.

• First of all, you need to understand that the refrigerator is equipped with a special device to remove heat. That is why its back wall is constantly hot, which means that the device should not be placed close to the wall. A small gap is required to allow constant air circulation for cooling.
• Do not install the refrigerator in an airtight space. Due to the difference in operating temperatures, condensation can occur on its surface, which adversely affects the operation and significantly reduces the service life.
• When developing the design of a kitchen with a refrigerator, it is necessary to think in advance about the system for supplying electricity to the device. Do not use extension cords or tees. The refrigerator must be plugged into its own socket, which must be located nearby.
• If possible, ground the device if recommended by the manufacturer.

Read more article The location of the refrigerator in the kitchen - how to put it right.

Advice! Some experts recommend connecting the refrigerator through a rectifier or any other voltage stabilizer. This will avoid damage caused by power supply systems and will significantly increase the service life.

Service

Modern devices are fairly easy to maintain. It is enough to follow the recommendations that the instruction offers, and the refrigerator will serve for a long time and reliably.

However, some users still use older models that require additional care. It consists in periodic defrosting, thanks to which the refrigerator gets rid of a large layer of ice in the freezers.

Advice! Even new models are recommended to be periodically defrosting, during which you can clean and wash the device with a little water and lemon juice.

Design

Interior design for an ordinary room or for a corner kitchen should be based on the chosen technique. Therefore, it is worth considering it in parallel with its selection.

However, if you plan to use an old refrigerator that does not fit into the new design in any way, then you can decorate it yourself.

• For these purposes, you can use a special self-adhesive film with various patterns or designs. However, it is worth remembering that this method is not durable and the photo applied to the surface will quickly erase or fade.
• You can also use special paints. At the same time, some manufacturers specially produce whole series of dyes that are intended for refrigerators. This method is very reliable and provides an opportunity to show personal creativity.
• Some video instructions recommend sewing up the refrigerator, turning it into a kitchen wall element. This method is very interesting, but when using it, do not forget that the back panel must receive a sufficient amount of air, and condensation must not collect inside the section. Therefore, it requires special ventilation holes, which excludes the use of a wall inside the composition.

Advice! It is best to use the painting method. Moreover, if you do not have your own talents in this area, then you can use the services of special companies that not only perform their work at a high professional level, but also give guarantee.

Conclusion

Having considered in detail all the options for installing the device and its design, we can conclude that choosing refrigerator, you need to take into account a lot of different points that will affect the appearance of the kitchen and its subsequent work. Moreover, the price of the device will not always be the main indicator. First of all, you need to focus on functionality and security systems.

Useful information in the material How to build a refrigerator into a kitchen set - a professional approach.

Having made the right choice, you can get a reliable and high-quality refrigerator, which will become a real decoration of any interior, without losing its performance.