Household appliances greatly simplify our lives, but they need to be looked after regularly. No matter how good the iron is, over time, scale forms on its sole, which can negatively affect the fabric. It is possible to clean the ironing device in no time, if you know how. An inexpensive and affordable tool that is in every home - toothpaste - will come to the rescue. Dirty sole will sparkle with toothpaste
1. Why is the sole of the iron getting dirty?
Modern ironing devices are equipped with many useful functions, including self-cleaning. The outsole is protected by a non-stick coating that glides well on all types of fabrics. However, even despite such a well-thought-out option, dirt and scale still remain on the iron platform.
The main reasons why the sole gets dirty:
1. Incorrect ironing conditions can melt the fibers of the fabric and adhere to the surface of the platform.
2. When working with cushioning materials (dublerin, non-woven), glue particles fall on the sole of the iron. When they accumulate in large quantities, they turn into carbon deposits.
3. If the appliance is not cleaned for a long time, a lot of dirt will form on it.
4. Due to unfiltered hard water, plaque remains on the sole.
Many people think that carbon deposits appear if you burn through the fabric with an iron. However, even with a slight overheating, particles of synthetic fibers firmly adhere to the sole. After a while, you will find blackening spots, which will be quite difficult to remove.
A universal way out of the situation is the well-known toothpaste. She is delicately about; cleans the platform from carbon deposits, white streaks, plaque and scale.
2. How toothpaste works
The process of cleaning an iron is somewhat similar to brushing your teeth. The paste removes plaque from the enamel, which, accumulating in large quantities, can turn into stones on the teeth. Most products contain abrasives. These components are characterized by increased hardness. This is why dentifrice can be used to polish a variety of surfaces.
If your iron has a steel or metal soleplate, you can use aggressive abrasives. Among them: aluminum oxide, baking soda, calcium carbonate and phosphate. However, the Teflon surface will be damaged by such products. Coarse abrasives leave scratches that can burn fabrics during ironing.
3. Why exactly she?
There are also special products for cleaning the iron. They include calcium carbamide and organic acids. It is possible to buy such a tool almost everywhere, and they are equal in cost. A natural question arises: why then do we need toothpaste?
1. At the most inopportune moment, special equipment may not be at home.
2. The cleaning agent does not always contain safe chemical components, and it is almost impossible to verify this. During the cleaning process, the agent comes into contact with the heated surface of the iron. As a result, the release of toxic substances in combination with a specific aroma is not excluded. In particularly sensitive people, this can provoke an allergic reaction.
The toothpaste also contains calcium carbamide, but it acts more delicately. This is why it is best used for cleaning Teflon soles. If the product contains coarse abrasives, it will only work on metal and steel surfaces.
4. Which remedy to choose?
For Teflon surfaces, we use bleaching pastes with a large amount of calcium carbamide and organic acids. For steel and metal, you can choose a cheaper product that contains aggressive abrasives.
Examples of delicate carbamide peroxide whitening toothpastes: Rembrandt plus, Splat Extreme White, R.O.C.S. Pro ".
Budget pastes with calcium carbonate: Colgate, 32 Pearls, Blue Pearls, Cedar Balsam, New Ftorodent.
Someone will find it irrational to purchase an expensive iron cleaner. However, pastes with calcium carbamide will help to effectively and delicately remove any dirt and deposits from the surface.
5. How to properly clean your iron
You will need: toothpaste, cotton pads, a brush with soft and fine bristles (for example, a toothpick), toothpicks.
Execution stages:
1. Set the temperature to minimum and heat up the ironing appliance. The platform should be barely hot so that you can touch it without risk of scalding.
2. Unplug the iron.
3. Apply a dentifrice to the brush and thoroughly walk through the dirty areas.
4. After spot treatment, proceed to cleaning the entire sole. Apply a thick layer of the whitening paste evenly to the iron bed and let sit for 30 minutes.
5. After half an hour, soak cotton pads in warm water and rinse off the cleanser along with the remaining dirt.
6. If paste or plaque remains in the holes of the sole, you can remove them with a toothpick. Next, turn on the iron and heat slightly. Let off a small amount of steam so that residue and paste come out of the holes.
READ ALSO: 5 ways to close the gap between the bathroom and the wall, so as not to breed puddles and flood the neighbors below
6. Alternative cleanser
If for some reason the first option did not work, use another proven method without using purchased chemicals. The principle of operation is similar to the use of paste, only you do not need to warm up the iron.
Execution stages:
1. Mix 1 tablespoon of baking soda and 2 tablespoons of water, stir until smooth.
2. Take a soft cloth, apply the mixture to it and work the iron bed.
3. After 10-15 minutes, rinse off the remaining cleaning agent with damp cotton pads or a cloth.
>>>>Ideas for life | NOVATE.RU<<<<
There are many special products for cleaning the soleplate of your iron. If they are not at home, toothpaste will cope with dirt just as well. To keep the iron working longer and not spoiling your favorite things, regularly clean its surface from plaque and carbon deposits. And if you are interested in how to spend less time with the iron, we recommend that you study 10 tips to make ironing quick and easy.
A source: https://novate.ru/blogs/150620/54917/