How to effectively get rid of stumps on the site - effective ways

It is quite difficult to clear the garden plot of old trees. To begin with, the plants are cut down and stumps remain, which are not so easy to uproot. However, there are several effective ways to help solve this problem.

Getting rid of stumps. Illustration for the article is used from teletap.org

I recommend reading: Acidifying the earth for hydrangeas - so that the bush is admired

With improvised means

If there are small stumps on the site, then they are uprooted with improvised means.

The most effective:

• with the help of fire;
• winches;
• ax and scrap;
• water.

With fire

The method has several advantages:

• environmentally friendly;
• with its help, a high-quality fertilizer is obtained - wood ash.

Disadvantages:

• it takes a long time;
• the smell of smoke.

Procedure:

1. Several holes are drilled in the stump.
2. Pour in the ignition fluid.
3. Set on fire.

In order for the combustion to be intense, at first they provide sufficient oxygen access to the hearth. As soon as the holes are enlarged to a sufficient size, firewood is thrown into the fire. Burned-out parts are promptly removed.

If it is not possible to drill holes or the wood is dense, a fire is made directly on the saw cut. The core will burn out gradually.

With a winch

The advantages of the method:

• you can get rid of the stump and roots immediately;
• environmental friendliness.

Disadvantages:

• suitable for small specimens;
• the height of the stump must be at least 1 m;
• you will need a special mechanism to pull the winch.

Procedure:

1. The winch with an effort of 3 tons is fixed to the nearest tree.
2. An additional rope is tied around the stump.
3. Dig in at a distance of 1.5 m from the trunk, exposing the roots.
4. The root system is chopped off.
5. Include a tensioning mechanism.

Using an ax and a crowbar

The method is suitable for stumps up to 20 cm in diameter.

Benefits:

• spends a minimum of time;
• tools are used that the summer resident is always at hand.

Disadvantages:

• great physical strength is needed;
• suitable for small trees with undeveloped root systems.

Procedure:.

1. The stump is dug in at a distance of 1 m, exposing the roots.
2. The root system is cut.
3. A scrap is slipped under the base.
4. Use the tool as a lever, pulling the stump out of the ground with effort.

If there is no root growth around the stump, the core is carefully chopped up with an ax, the earth is poured inside and covered with a plastic bag. Over time, the stump will rot itself.

With water

The method has advantages:

• environmentally friendly;
• does not require physical strength.

Disadvantages:

• a strong pressure of water will be required.

Procedure:

1. A hole is dug around the stump at a distance of 1.5 m.
2. A strong pressure of water is directed under the base.
3. After a while, the water washes away the soil from under the stump, and it is uprooted with a crowbar.

The method is not suitable for those areas that are not equipped with wells with a pump.

Uprooting stumps with specialized equipment

If there are trees with a deep root system on the site, there are many of them or the diameter of the stumps is large, you have to use specialized equipment:

• earthmoving;
• stump grinder.

Earthmoving equipment

It includes:

• tractors;
• excavators;
• bulldozers;
• manipulators.

Benefits:

• speed and quality of removal;
• the ability to remove voluminous stumps.

Disadvantages:

• overpriced;
• requires a lot of room to maneuver the technique;
• significant damage to the soil.

As a rule, this method is resorted to at the very beginning of the arrangement of the site. When, after the purchase, there are old stumps or trees on the territory that are being cut.

Effective root removers

Often, after the stump has been removed, roots remain in the ground, which give rise to growth. To avoid this problem, use means processing.

Urea

Several holes are made in the stump and urea is poured into it. Wrapped with polyethylene. After a year, the stump rots along with the roots.

Potassium nitrate

First, water is poured into the drilled holes, and then potassium nitrate is tightly placed. Cover with foil.

After 6 months, the stump dries up and is burned.

You can quickly and effectively get rid of old stumps in the area. It is enough to choose the most suitable option.

Do you know how to effectively get rid of stumps on the site?

Original articleand many other materials, you can find on ourwebsite.

Read also: The secret of the abundant flowering of hydrangeas