I got rid of the old filter. I set myself a new, advanced one. Telling the reasons

  • Jul 30, 2021
click fraud protection

My old filter is morally outdated, and this is due to the fact that replacing filter elements in it is a whole story, not to say very pleasant. It is necessary to unscrew the flasks with a special key, which is constantly lost. If the dismantling is inaccurate, then a lot of water is spilled on the kitchen chipboard (which shortens the life of the kitchen set).

In this case, it is desirable... no, not so... It is just necessary to wash these flasks together with the body from the slimy plaque, which is necessarily formed.

And this procedure is quite difficult to do: it is not always possible to get to the bottlenecks of the filter housing. I even made a special tool out of a toothbrush for convenience, but nonetheless.

All these factors constantly delayed the replacement of the filter element, which led to a deterioration in the quality of drinking water and affected the health of the whole family. Health is the value that must be preserved from a young age and never bought for any money ...

instagram viewer

After thinking about this problem, I decided to purchase the Barrier Hardness X2 filter, which will not allow my laziness to negatively affect the quality of the water in the house. After all, it is very easy and quick to replace the filter elements in it, literally in one motion.

After dismantling the old filter, I started assembling a new, more technologically advanced Barrier, specially designed for hard water. It helps to get rid of limescale and also removes mechanical particles, chlorine and heavy metals. In the box, there are three non-separable filter elements that are responsible for each stage of water purification.

Of the advantages, I would like to immediately note a small case with a quick installation system, as well as a system for lifting elements from a stationary, working position to a convenient one for replacement.

A beautiful tap for drinking water harmoniously complements an already excellent design idea. The set also includes two durable hoses and a ball valve for feeding the filter system.

Any advanced housewife can handle the installation of this filter, not to mention men. If the installation is primary, then it is additionally necessary to drill a hole in the countertop or sink.

For a family of 2 people, the resource of cartridges is enough for 1000 liters or for 4-6 months. By the way, do not admit my mistakes, immediately take a filter with a quick replacement of elements, it is very convenient.

If you are interested in the process of installing filter elements with a system of protection against accidental unscrewing under pressure Smart Lock - welcome to the gallery, scroll through the photos below:

To install the "Barrier Expert" filter element, you just need to press the element to the body and rotate
This procedure is done in a matter of seconds.
Tilt-back system for easy access
To install the "Barrier Expert" filter element, you just need to press the element to the body and rotate
  • Convenient, quick installation of a water treatment system.
  • Fast replacement of filter elements (which is very important!).
  • High quality filtration.
  • Delicious water.

All these points have been verified by ourselves.

I recommend it to you too, here is the link where you can purchase this filter: EXPERT Hardness x2.

And how I used to live without this convenient "spring" ...