How to wash a bottle from the inside if your hand doesn’t reach there

  • Dec 28, 2021
How to wash a bottle from the inside if your hand doesn’t reach there

It happens that a container with a narrow neck, for example, a hefty wine bottle or a plastic water bottle, needs to be washed from the inside from some stubborn dirt. However, a hand with a sponge or a stiff brush cannot be pushed into such a container. A natural question arises: what to do? In fact, there is nothing difficult in cleaning such dishes. True, you will need to have some useful things in the house.

You will need a couple of magnets. ¦Photo: magnets-shop.com.
You will need a couple of magnets. ¦Photo: magnets-shop.com.
You will need a couple of magnets. ¦Photo: magnets-shop.com.

The first and foremost thing we need to clean any narrow-necked vessel is a magnet (or magnets)! The stronger the chosen magnet, the better. Very good if you can get a couple of neodymium. Next, we need a thin towel or rag, as well as a choice: a soft metal brush-sponge or an ordinary porous sponge. The choice of the last two is made depending on the strength and type of pollution.

You will need sponges. ¦ Photo: myseldon.com.
You will need sponges. ¦ Photo: myseldon.com.
instagram viewer

So, if you use a metal sponge brush, you probably won't need a second magnet. We just push it into the neck, pour some water into the vessel, wrap the magnet in a rag (so as not to scratch our bottle) and then "catch" the sponge with it through the glass / plastic wall. Immediately after that, we begin to drive the magnet along the surface of the vessel, pulling the sponge behind us and gradually cleaning the inner walls from contamination. Water and detergents are poured inside at will.

We insert a magnet into the sponge. ¦ Photo: youtube.com.
We insert a magnet into the sponge. ¦ Photo: youtube.com.

If you need to use a regular sponge, the cleaning technology is generally similar. However, you first have to make a simple tool. To do this, cut the sponge so that it has a small pocket. We insert a neodymium magnet into this pocket, and then glue the cut with glue. We wait until it dries up and immediately throw a sponge with a magnet inside the bottle. Then we repeat the above procedure. Three to the bitter end.

>>>>Ideas for life | NOVATE.RU<<<<

Three to the bitter end. ¦ Photo: youtube.com.
Three to the bitter end. ¦ Photo: youtube.com.

If you want to know even more interesting things, then you should definitely read about more 8 life hacks for those who love cleanlinessbut hates cleaning.
A source:
https://novate.ru/blogs/160821/60193/

IT IS INTERESTING:

1. Why did Japan buy broken bottles from the USSR, and then dump them into the sea?

2. Makarov pistol: why modern models have a black handle, if in the USSR it was brown

3. How a huge ship manages to stay at a relatively small anchor in the current