How to make your own glue that will grab wood, plastic, and brick

  • Aug 01, 2022
click fraud protection
How to make your own glue that will grab wood, plastic, and brick

You can make high-quality glue from improvised materials, and literally at home. Even if some of the ingredients are not found in the closet, you can get them at the nearest store. Fortunately, everything needed for the production of artisanal glue costs mere pennies, and the miracle composition itself is prepared almost as quickly and easily as a pair of eggs broken in a frying pan.

Cooking with acetone. |Photo: drive2.ru.
Cooking with acetone. |Photo: drive2.ru.
Cooking with acetone. |Photo: drive2.ru.

ATTENTION: the preparation of handicraft adhesives is carried out on the basis of acetone. Acetone poisonous and dangerous for human health. This substance belongs to hazard class IV (low level) and causes severe irritation of the mucous membrane. Inhalation of acetone vapors can cause pulmonary edema and toxic pneumonia, abdominal pain, dizziness and weakness. In this regard, work with acetone should only be done in a well-ventilated area or outdoors!

We use nylon stockings. |Photo: redsol.ru.
We use nylon stockings. |Photo: redsol.ru.
instagram viewer

Glue recipe #1: We “steal” old nylon stockings from a wife or mother-in-law and cut them into small pieces with scissors. We put the strips of tights in a container and pour them with acetone, after which we confidently stir with a stick until all the nylon dissolves, turning into glue. The composition is used immediately after preparation.

>>>>Ideas for life | NOVATE.RU<<<<

There are many different acetate fabrics. |Photo: livemaster.by.
There are many different acetate fabrics. |Photo: livemaster.by.

Glue recipe #2: if the farm has acetate bags, then it is quite possible to replace nylon strips obtained from stockings with them. Cut out several strips or squares of acetate fabric with scissors. The blanks are laid out over the entire surface of the part to be glued, after which a small amount of acetone is poured onto the fabric. On top is placed what should be glued. Some load is placed on it. The whole "construction" remains to solidify and set for about 1 day.

What kind of animals is afraid and tries to bypass the "king of the taiga" brown bear
Novate: Ideas for life Yesterday
Stroybat: why such units were considered the worst place for military service during the years of the USSR
Novate: Ideas for life July 28th
Glue is not for the street. ¦Photo: laifhak.ru.
Glue is not for the street. ¦Photo: laifhak.ru.

Glue recipe #3: for this method, we need a regular foam. The material is crumbled into small pieces into some container, after which (what a surprise!) It is poured with acetone. While the foam is melting in the solvent, the resulting glue must be constantly stirred with a stick. The composition is used immediately after preparation. An important "but": acetone and foam glue cannot be used where the temperature drops below zero degrees Celsius.

If you want to know even more interesting things, then you should read about
how to patch cracks in wood floor without much expense or hassle.
Source:
https://novate.ru/blogs/040522/62889/