It looks simple, but in fact actually had pretty tough love...
Before you start laying, the master drove the first row as an experiment to be sure that the owner of such performance exactly wants.
Frankly, that one number (even two or three), if you are not an experienced designer, give nothing compared to the way it looked in total at home.
Masonry made by one person with a capacity of 200 units. bricks for 10 hour work shift.
Despite the fact that the brick is put slowly, so more and the solution is mixed only two or three buckets at a time.
Why only two or three buckets?
Firstly, the brand of white cement M-600, setting time - just over an hour.
Secondly, for a uniform natural displacement of a brick solution requires a certain elasticity, which solution loses already in an hour, especially in summer.
laying process
The solution was applied to the lower packed series in a sufficient amount to no more than two masonry bricks. On the front side, where the extrusion mixture is scheduled rim from the solution by 5 mm. above proposed seam thickness (the volume that will be embossed). If the wizard stands on the inside of the building, then laying each brick is made from it, ie, bricks laid simultaneously with the translational movement in the direction of weld formation.
If the solution is extruded insufficient brick pick tamp, the slightly narrowed seam. If the seam came out of masonry, brick is removed and the stacking is done again.
That's all, thank you for your attention!
You can also read my materials "Brick-antique for 12 rubles." or "Brick House: estimated 1.3 million rubles."
If you like my article, place and Likesubscribe to the channel!