Tip 1. Test foundation for a bath in advance. To make sure that the foundation is strong, conduct an experiment. Pour the solution into a small shape and then try to break it up with a hammer after drying. If the constitution is not broken, it has been tested successfully.
Tip 2. Do not forget about the subject distance. SNIP point gap that must be observed between the bath and other buildings. To avoid problems, it is desirable to construct the building in 5-6 meters from other objects. Violation of the regulations will result in a fine or even the need to demolish the building.
Tip 3. After buying the carcass give it time to adapt. Traditionally frame buy in the summer or autumn. Then he left for the winter. It is desirable to provide wood for six months to ensure that she was accustomed to the temperatures.
Continuation of construction is possible only after the final shrinkage.
Tip 4. Place the door on the south side of the bath. This advice is well known, but few follow it. It will help in the first place to those who are going steamed in the winter season, as snow will not accumulate at the door.
Tip 5. Protect chimney metal box. The quality of the work depends on the chimney fire safety of people in the bath. The chimney must be protected from inflammable wooden parts with metal. The distance to the wooden frame must be at least 40 centimeters.
Tip 6. Check the quality of fittings furnace. When buying a furnace people rarely stop to check its fittings. To oven to work properly to this point should be approached with special attention. In the ash-pit door should operate all the locks. If during operation the door jam, visitors bath life will be threatened.
Tip 7. Before firewood make sure no rot. Firewood usually harvested in warm weather because in this climate they clearly emerges rot. If this operation is carried out in winter, you need to knock on the trunk.
Clunk is a sign of decay processes - such logs should be rejected.
Tip 8. Choose to cut down a tree on the basis of the thermal conductivity of rocks. When buying wood is desirable to stop at those embodiments that can withstand high temperatures and do not decompose at elevated humidity levels. These trees include oak, larch and lime. Upholstery bath is advisable to use aspen or alder.
Tip 9. Place the door in the steam so that it opens to the outside. This rule is dictated by the occupational safety - in the event of an emergency door is easier to push than to open inwards. Such a situation may be the occurrence of fire, reception of the dose of carbon monoxide or a sudden deterioration of health.
Council 10. Pick a place to build a bath beforehand. It is not recommended to construct a bath in the lowlands and near water bodies that are regularly raised at several levels.
If the construction placed on a hill, it is no longer necessary to install drainage. Water will start to flow in a natural way.