Each house has a chopper, I am not for a moment doubt. And sooner or later, during the operation she begin to grow blunt knives, and accordingly, twist it will be bad.
So I took the situation when his wife began to turn the stuffing, and he does not turn from it in practice. She also concluded that the knives are dull, and I asked them to grind.
It is necessary, it is necessary. I began looking for information on how best to do this and found. I decided to sharpen knives, screwdrivers, with a special, self-made nozzle. Make this attachment, much effort was required.
We need to grind the bolt head in such a way that it is firmly inserted into the center hole of the blade. Well, what's in my garage grinder there. If it is not someone, then you can just bolt a file to grind, it just takes a little more time.
After the grind of the bolt head and she began to come close to the hole the knife in order to order to sharpen a knife, not a head, it was necessary to make the appropriate stops. For this I need a special washer.
Then he took a screwdriver and began to sharpen a knife on a stone. At first I used the stone to the larger grain, then smaller.
Just need to press the knife against the stone, screwdriver and turn in a circular motion to sharpen a knife. At the end of sharpening, I poured some water a little stone.
As a result, the knife is sharpened very well, as much as the entire blaze started. What I basically wanted.
Round knife can also sharpen using to adapt, but it's easier - handles. For the manufacture accommodate a lot of time goes, it is much more difficult to design than to the cutting knife.
Just round the knife to put on the bar, and pens, using circular motions from side to side, to grind off the entire production. In principle, the process is not complicated, afford to almost everyone.
As a result, we have turned a brilliant round knife again able to perform his job.
I put them in place in a meat grinder. The wife comes home from work in the evening, let try as I did. In appearance and sharpness, everything seems to be fine. And in fact, even if she checks them. If you do not begin to shout that the chopper is still bad turns, so I coped with its task!