This article goes on very simple, but the purification process gas obaldenno plate lattice.
It's no secret that the lattice-constant fat settles and accumulates on them.
So what action should be taken, and the effort to make the minimum number that our grid would be cleansed and become as good as new.
Everything is very simple.
It is necessary to put a dirty grate into a large plastic bag with handles. The package is desirable to use a new hole in it should not be.
Grille put in a package of the most conservative way that would not break the plastic bag.
Then we need to advance the purchased ammonia. It can be purchased on the open market at the pharmacy.
In the next step you need about 5 tablespoons of ammonia quickly pour into a plastic bag which is our grid.
If the grid is not very dirty, then it will be sufficient and 3 tablespoons ammonia.
Pour ammonia with caution, keep in mind what is its smell. Not nanyuhalsya case.
Next package tying, for this use its handle. So how to tie a good turn is unlikely, then take the second set and put the handle down to it the first packet with a lattice. You can use a few more packages.
The main task of the almost complete overlap of air and ammonia also evaporates from the inside should not.
I advise you to use for this purpose garbage bag capacity of 100 liters with a knotted handles. These two packages will be exactly enough.
I advise you to do this procedure at night, because it is simple, but time consuming. And if you do at night, so you do not have to spend time.
At night you need to rest.
Packed in a lattice of the package is poured ammonia and placed in Stronk, let it lie until morning. Or you can put in the bathroom, in the kitchen that would not interfere. It does not matter.
In the morning, remove unnecessary packets, take out from the grid plate and gas wash it under running water stream then pass mochalochkoy, in some places it may have a knife and scratched, but in the end it turns out that the lattice becomes like new.